Printer 710_810 v8 Transportation.pdf - 第78页
TRANSPORT ATION MAJOR RE LOCATION 34.78 Technical Reference Manual Chapter Issue 7 Oct 06 4. Connect t he keyboard/mouse to 4SK03 of the 4 port USB hub. 5. Place the keyboar d into the stowage on the inside of the f ront…
TRANSPORTATION
MAJOR RELOCATION
Chapter Issue 7 Oct 06 Technical Reference Manual 34.77
8. Connect the trackball mouse to 4SK02 on the 4 port USB hub.
9. Connect the IR receiver unit to 4SK03 on the 4 port USB hub.
Fitting of MMI
Assembly (Metal
Cover)
1. Position the monitor centrally on top of the machine.
2. Connect the cables to the following connections on the rear of the monitor:
• Monitor Power Cable (DC)
• VGA Cable
3. Locate the 4 port USB hub secured to the left side of the mains isolator
switch bracket.
TRANSPORTATION
MAJOR RELOCATION
34.78 Technical Reference Manual Chapter Issue 7 Oct 06
4. Connect the keyboard/mouse to 4SK03 of the 4 port USB hub.
5. Place the keyboard into the stowage on the inside of the front panel.
TRANSPORTATION
MAJOR RELOCATION
Chapter Issue 7 Oct 06 Technical Reference Manual 34.79
Installing High
Throughput
Conveyors (HTC)
The following procedure details how to install the HTC auxiliary conveyors to
the machine. This installation procedure is for a machine product transfer in the
left to right direction.
To install the auxiliary conveyors, remove the left and right safety covers and
the following panels (as detailed in the Covers chapter):
• Gull wing covers - front and rear side covers on both sides
• Sliding glass covers - front and rear corner panels and the centre side
panel on both sides
1. Remove the four auxiliary conveyor securing bolts from the holes in the
machine frame (two on either side).
Auxiliary Conveyor Securing Bolts
Machine Frame