Printer 710_810 v8 Transportation.pdf - 第19页
TRANS PORTATION MAJOR RELO CATION Chapter Issue 7 Oct 06 Technical Reference Manual 34.19 Camera T ransit Screws (Linear Drive) 1. Align the th readed hole in t he camera X drag chain brac ket with the hole in the camera…
TRANSPORTATION
MAJOR RELOCATION
34.18 Technical Reference Manual Chapter Issue 7 Oct 06
Camera Transit
Screws (Rotary
Drive)
1. Manually pull the camera beam to the front of the machine.
2. Align the threaded hole in the camera Y drag chain bracket with the hole in
the right hand printhead and fit the M8 transit screw.
3. Align the threaded hole in the camera beam with the hole in the camera X
drag chain bracket (below the camera beam) and fit the M8 transit screw
downwards through the camera beam.
Note
Camera X Drag Chain Bracket is hidden
from view by the Camera Beam
Transit Screws
Camera Beam
Right Hand Printhead
Camera Y Drag
Chain Bracket
TRANSPORTATION
MAJOR RELOCATION
Chapter Issue 7 Oct 06 Technical Reference Manual 34.19
Camera Transit
Screws (Linear
Drive)
1. Align the threaded hole in the camera X drag chain bracket with the hole in
the camera beam extrusion and fit the M8 transit screw.
2. Align the threaded hole in the camera Y plate with a spare hole in the camera
Y linear bearing at the rear of the machine and fit the M8 transit screw
ensuring that the transit screw is fitted with a lock nut and crinkle washer.
3. Tighten the locking nut on to the camera Y plate to prevent the transit screw
vibrating loose during transportation.
View on Right Hand Underside of Camera Beam
Transit Screw
Transit Screw
Camera Y Plate
Camera Y Linear Bearing
Camera X Drag Chain Bracket
Camera Beam Extrusion
Lock Nut and
Crinkle Washer
TRANSPORTATION
MAJOR RELOCATION
34.20 Technical Reference Manual Chapter Issue 7 Oct 06
Paste Dispenser
Transit Screw
1. Align the hole in the paste dispenser mounting tray with the hole in the belt
clamp bracket.
2. Fit the paste dispenser transit screw without over tightening the screw.
NOTE
The paste dispenser transit screw is not designed to clamp the belt clamp
bracket against the paste dispenser mounting tray. The transit screw
restricts the paste dispenser from moving.
View on Right Hand Underside of Paste Dispenser
Transit Screw
Paste Dispenser Mounting Tray
Belt Clamp Bracket