80S-2080F480F5.pdf - 第119页
SIPLACE 80S-20/F4/F5 User M anual 2 Introduction and Basic Concepts 05/99 Issue from Software Version SR.405.xx 2.4 Brief Description and Principles of the User Interface 2 - 35 2.4.3 The Vi ew Menu The "View" …
2 Introduction and Basic Concepts SIPLACE 80S-20/F4/F5 User Manual
2.4 Brief Description and Principles of the User Interface 05/99 Issue from Software Version SR.405.xx
2 - 34
2.4.2.6 Shut down computer
Use this option to shut down the station computer. A box will appear with a message, warning you of the pos-
sibility of losing data and prompting you to confirm the action.
SIPLACE 80S-20/F4/F5 User Manual 2 Introduction and Basic Concepts
05/99 Issue from Software Version SR.405.xx 2.4 Brief Description and Principles of the User Interface
2 - 35
2.4.3 The View Menu
The "View" menu is subdivided into three main function groups: Placement functions, Single functions and
Vision functions. You can also start the SITEST and use the functions of the GEM interface. The functions can
be selected from either the menu bar or the button bar.
Fig. 2.4.3 Main view
- Key to Fig. 2.4.3
1 Main view 2 Set-up
3 Errors 4 Component feeder systems
5 Gantry functions 6 Transport functions 2 (Double transport option)
7 Transport functions 1 (standard) 8 Teach fiducials
9 Test component 10 Sitest
11 GEM interface (option)
1 8 3 2 5 4 6 7 9 10 11
2 Introduction and Basic Concepts SIPLACE 80S-20/F4/F5 User Manual
2.4 Brief Description and Principles of the User Interface 05/99 Issue from Software Version SR.405.xx
2 - 36
2.4.3.1 Composition
2.4.3.2 Placement Functions
PLEASE NOTE
The complete range of placement functions is described in Chapter 3 of this User Manual.
l Set-up
The set-up is shown separately for each location. Use the "Set-up check with barcode“ button to activate refill-
ing with the barcode reader or switch on the barcode reader directly. The Set-up check with barcode“ option
must have been configured on the line computer before you can do this.
l Errors
Errors are displayed in various error lists, sorted by type. There are 4 error lists: track errors, transport errors,
machine errors and general errors.
The last error to occur is shown at the top of the table. Identical errors are incremented in error counters.
l Component feeder systems
In the "Component feeder systems“ submenu, you can use empty tracks and fill levels for linear feeders, mag-
azines and wafflepack changers at all locations.
The menu
"View"
Placement functions
(Chapter 3)
Set-up
Errors
Component feeder systems
Single functions
(Chapter 4)
Gantry functions
Transport functions 1
Transport functions 2 (option)
Vision functions
(Chapter 5)
Teach fiducials
Test component
SITEST All functions
GEM interface
(Section 11.9)
Status display
Load placement program
Messages
Tab. 2.4.1 Overview of the “View“ menu