80S-2080F480F5.pdf - 第212页
4 Single Functions SIPLACE 80S-20/F4/F5 Us er Manual 4.3 Single Functi ons, Gantry with 6x Revolver Head (for 80F 5) 05/99 Is sue from Software Version SR.405.xx 4 - 36 4.3.6 Nozzle Configuration 6x Revolver Head This fu…
SIPLACE 80S-20/F4/F5 User Manual 4 Single Functions
05/99 Issue from Software Version SR.405.xx 4.3 Single Functions, Gantry with 6x Revolver Head (for 80F5)
4 - 35
4.3.5 Nozzle Offset, 6x Revolver Head
This function is used for determining the nozzle height of all segments. If all segments are in the star the value
found here will refer to Segment 1.
In the In the
Gantry functions
menu click on the symbol button for
Nozzle offset
revolver head
.
Fig. 4.3.7 Nozzle offset 6x revolver head
Click on the
Measure
button.
Press the
Start
button when you are asked to do so on the screen. The active gantry will move to a defined
position above the board conveyor and there carry out measurement of the z height with all segments.
Once measurement is finished the gantry will return to its starting position. The measured nozzle heights
will now be displayed.
F
4 Single Functions SIPLACE 80S-20/F4/F5 User Manual
4.3 Single Functions, Gantry with 6x Revolver Head (for 80F5) 05/99 Issue from Software Version SR.405.xx
4 - 36
4.3.6 Nozzle Configuration 6x Revolver Head
This function is used for displaying, checking and changing the nozzle sizes of the nozzles at the placement
head.
NOTE
Editing or confirming the sizes is only possible with the specified clusters and set-up.
In the
Gantry functions
menu click on the symbol button for
Nozzle configuration revolver head.
Fig. 4.3.8 6x revolver head nozzle configuration
- Key to Fig. 4.3.8
1 Changeover position
F
1
SIPLACE 80S-20/F4/F5 User Manual 4 Single Functions
05/99 Issue from Software Version SR.405.xx 4.3 Single Functions, Gantry with 6x Revolver Head (for 80F5)
4 - 37
4.3.6.1 6x Revolver Head - Star Step
When this function is activated the revolver head is advanced each time by a step of one segment. The seg-
ment which is in the changing position is indicated by an arrow ( <== ) (see Fig. 4.3.8) on the revolver head
diagram.
Nozzles which have to be changed are marked in the
To change
column by an arrow ( <== ).
Within the
Revolver head
working area click on the
Star step
button. The revolver head is advanced by a
step and the changing position displayed.
4.3.6.2 Confirm
When this function is activated, changing a requested nozzle is confirmed.
This acknowledgment is required with different nozzle configurations ( programmed and actual) if the
Pro-
grammed
column’s contents is to be transferred into the
Actual
column (<== in the
To change
column).
This new nozzle configuration is saved to the
aktuell.ma
machine data file. In all cases the star position pro-
cessed will be the one which is shown in the changing position (<== in the revolver head diagram).
Before confirmation the nozzle at the segment must be changed accordingly.
Once processing has finished the two columns (
Programmed
and
Actual
) must be the same.
l Procedure
Cycle the nozzle on the revolver head which is to be changed
(<== in the
Change nozzle
) to the changing position.
Change the nozzle in accordance with the programmed nozzle configuration.
Within the working area ’Revolver head’ click on the
Confirm button
.
Once processing has finished the two columns (
Programmed
and
Actual
) must be the same.
4.3.6.3 One nozzle - Return (with Nozzle Changer Only)
When this function is activated, a specific nozzle on the revolver head can be returned to the correct maga-
zine of the nozzle changer.
Click on the "One nozzle“ button in the "Nozzle changer“ work area.
Click on the
Return
button. An input box will appear on screen.
Enter the desired nozzle number in the input box and click on
OK
to confirm.
The selected nozzle will be returned to the correct magazine of the nozzle changer.