80S-2080F480F5.pdf - 第9页
SIPLACE 80S-20/F4/F5 User M anual 0 Introduction 05/99 Issue from Software Vers ion SR.405.xx 0.1 General 0 - 5 0.1.2.3 Survey of 03/97 Revis ion Fluxing 1 1.7 Remote S ervice 1 1.8 GEM In terface 1 1.9 On-l ine help exp…
0 Introduction SIPLACE 80S-20/F4/F5 User Manual
0.1 General 05/99 Issue from Software Version SR.405.xx
0 - 4
NOTE
We should like to point out that the contents of this User’s Manual does not constitute part of a previous or
existing agreement, commitment or legal relationship nor is it intended to modify such. All obligations of Sie-
mens AG derive from the sales contract in question, which also contains complete warranties with general
validity. These contractual provisions relating to warranty are neither extended nor limited by the information
contained in this user’s manual.
0.1.2 Release Notes
First version User’s Manual SIPLACE 80S-20/F
4
Edition 11/95
Basic version User’s Manual SIPLACE 80S-20/F
4
Edition 01/96
Revision of User’s Manual SIPLACE 80S-20/F
4
Edition 03/96
Revision of User’s Manual SIPLACE 80S-20/F
4
Edition 06/96
Revision of User’s Manual SIPLACE 80S-20/F
4
Edition 03/97
Revised version of User’s Manual SIPLACE 80S-20/F
4
/F
4
-6 Edition 07/97
Revision of User’s Manual SIPLACE 80S-20/F
4
/F
4
-6/F
5
Edition 03/98
Revision of User’s Manual SIPLACE 80S-20/F
4
/F
5
Edition 05/99
0.1.2.1 Survey of 03/96 Revision
0.1.2.2 Survey of 06/96 Revision
Revised functions Chapters / Sections affected
Nozzle, type 412, for flip chips 11.5; 17.2
Nozzle contour diagrams 17.1
Overview of nozzles 17.2
PCB barcode configured for COM 2 11.3
Maintenance of gantry / revolver head / IC head 9
Maintenance schedules 9
Setting the components illumination at the revolver
head camera
7.6.5
New functions Chapters / Sections affected
Multiple Bar code 5.4.2
Twin conveyor 6; 11(so far only the software has been imple-
mented)
SIPLACE 80S-20/F4/F5 User Manual 0 Introduction
05/99 Issue from Software Version SR.405.xx 0.1 General
0 - 5
0.1.2.3 Survey of 03/97 Revision
Fluxing 11.7
Remote Service 11.8
GEM Interface 11.9
On-line help expansions 4
Diagnostics 19.2
Conveyor limit stop right / left LC UNIX User’s Manual
Section 12.1 Configuration editor
Revised functions Chapters / Sections affected
Notes on Touch Screen 2
Vision systems 7
Maintenance schedules 9
Maintenance of gantry / revolver head / IC head 9
Revised functions Chapters / Sections affected
Maintenance of empty tape cutter 9.1.4; / 9.2; / 9.3.4
Maintenance of components table 9.1.4; / 9.2; / 9.3.3
Maintenance of revolver head 9.1.4; / 9.2; / 9.5.6 Vacuum/Forced air valves
New functions Chapters / Sections affected
0 Introduction SIPLACE 80S-20/F4/F5 User Manual
0.1 General 05/99 Issue from Software Version SR.405.xx
0 - 6
0.1.2.4 Overview of the revisions in the 07/97 edition
0.1.2.5 Overview of the revisions in the 03/98 edition
New functions Affected Chapter / Section
6-nozzle revolver head (all functions) 0; 2; 3; 4; 5; 9; 17
Cover guard on input / output belt 1.2
Display PCB barcode 2; 3; 11
Starting SITEST from user interface
(operation and the range of functions are described
in a separate manual)
2.4.3
Omitting components 3
Approaching the set-up position 4.2.1; 4.3.1
Guidelines for describing case shapes 5.7
What needs to be done...? New chapter 6
Components > 12 mm 10.10
Twin conveyor, fixed left side 11.10
Revised functions Affected Chapter / Section
New breakdown into chapters Chapter 3 to 8 and 10
Overview and technical data, tape feeder modules 10.1
Manual nozzle change 9.5; 9.7
Maintenance of the camera systems 9.9
New nozzle type 8 with contour diagram 17
New functions Affected Chapter / Section
Component vision system for the
6-nozzle revolver head
0; 5
User Interface 2
Empty Tape Cutter on SIPLACE 80F
5
Automatic
Placement Machines
10.8
Surf tape feeder module 10.10
Revised functions Affected Chapter / Section
Introduction 0
Operational safety 1