80S-2080F480F5.pdf - 第181页

SIPLACE 80S-20/F4/F5 User M anual 4 Single Functions 05/99 Issue from Software Version SR.405.xx 4.2 Single Functions, Gantry with 12x Revolver Head 4 - 5 4.2 Single Functions, Gantry with 12x Revolv er Head NOTE With tr…

4 Single Functions SIPLACE 80S-20/F4/F5 User Manual

4.1 Overview 05/99 Issue from Software Version SR.405.xx

4 - 4

4.1.1 General Comments

Single functions comprise gantry functions and transport functions.

Single functions are used for carrying out particular actions following a fatal error and also for setting up and

testing the machine. Single functions make it possible to control various function modules in a defined man-

ner.

The functions covered in this Chapter 4 are described for the SIPLACE 80F

or 80F

, but they also apply to

the SIPLACE 80S-20. The only difference is that the gantry functions of the SIPLACE 80F

or 80 F

include

additional IC head and wafflepack changer functions.

WARNING

Single functions may only be used by appropriately qualified and trained personnel since improper handling

can result in injury to the person and / or damage to the machine.

SIPLACE 80S-20/F4/F5 User Manual 4 Single Functions

05/99 Issue from Software Version SR.405.xx 4.2 Single Functions, Gantry with 12x Revolver Head

4 - 5

4.2 Single Functions, Gantry with 12x Revolver Head

NOTE

With travel functions of the x or y axis the machine cover must be closed and to execute the function the start

button must be pressed. The gantries will in every case travel only at slow speed.

In main view click on the symbol button for

Gantry functions.

Fig. 4.2.1 Gantry functions

4 Single Functions SIPLACE 80S-20/F4/F5 User Manual

4.2 Single Functions, Gantry with 12x Revolver Head 05/99 Issue from Software Version SR.405.xx

4 - 6

4.2.1 Gantry Functions

In the

Gantry functions

screen click on the symbol button for

Gantry functions.

Fig. 4.2.2 Gantry functions

NOTE

All travel functions of the main axes (x and y) must be launched using the start button. The screen message

’Please press the start button’ which follows the menu item ’Action’ in the main menu will ask you to press the

start button. If the cover is not closed, another screen message will ask you to close the covers.

4.2.1.1 Go to set-up position

In the set-up position, the gantry is in a position in which the feeders can be unloaded and retooled. At this

time, the gantry is located in the center of the machine.

Click on the Go to set-up position button and then press the Start button whenever you are prompted to

do so. The gantry will travel to the set-up position.