80S-2080F480F5.pdf - 第78页
1 Operational Safety SIPLACE 80S-20/F4/F5 User Manual 1.6 Lock out and tag ou t procedure 05/99 Issue from Software Version SR.405.xx 1 - 40
SIPLACE 80S-20/F4/F5 User Manual 1 Operational Safety
05/99 Issue from Software Version SR.405.xx 1.6 Lock out and tag out procedure
1 - 39
These are workers who operate the machinery or equipment that may be de-energized. Other employees
who may be affected include those who work in an area that contain equipment that may be locked/tagged
out. These employees have to be instructed about the nature of the energy control program , they must
know why lock/tag out is important, what tags and locks look like and why they must not remove tags or
locks.
5. All others.
As the name implies, any employee who is not affected or authorized fits into this category. There employ-
ees include office personal, engineers, managers, and upper management. Although they do not have a
direct relationship to the machinery being locked or tagged, they have to receive some training.
6. To evaluate the lock/tag out procedure, the safety department will conduct periodic inspections. As part of
the inspection the safety department will document that all facets of the procedure are followed. The
safety department will follow up with formal classroom review or retraining of the LO/TO procedure.
1.6.6 Review
This procedure will be reviewed and amended as required but in no case less frequently than once a year.
1.6.7 Appendix
These procedures represent the minimum lock/tag out requirements. Any additional safeguards needed to
complete work safely can be specified by facilities supervision, the safety officer, the safety committee and the
health department.
1 Operational Safety SIPLACE 80S-20/F4/F5 User Manual
1.6 Lock out and tag out procedure 05/99 Issue from Software Version SR.405.xx
1 - 40
SIPLACE 80S-20/F4/F5 User Manual 1 Operational Safety
05/99 Issue from Software Version SR.405.xx 1.7 Emissions and energy efficiency of the MCM 1405 ND monitor
1 - 41
1.7 Emissions and energy efficiency of the MCM 1405
ND monitor
1.7.1 X-ray radiation
The X-ray radiation generated in the monitor is adequately shielded by the intrinsically safe cathode-ray tube.
The local emissions are less than 1 µS/h (micro-Sievert per hour). The accelerating voltage is limited by the
device to a maximum of 26 kV.
The monitor conforms to the German Directive for protection against harmful X-ray radiation. The X-ray emis-
sions from the monitor conformed to the DHHS Rules 21 CFR, subsection J on the date of manufacture and
to the FCC Rules, part 15.
1.7.2 Efficiency and electromagnetic emissions
The MCM 1405 ND monitor fulfils the conditions for efficiency (to ISO 9241-3) and safety (to EN 60950).
The low-frequency electromagnetic emissions fall below the MPR II guidelines issued by the Swedish Radia-
tion Institute in Stockholm.