Portal-Operation-Manual-REV-I.pdf - 第8页
PVA Portal Manual Revision I / Janua ry 2022 Page 8 of 106 1.3 Safety Certain warning symbols are aff ixed to the machine and corres pond to nota tions in this manual. Before operating t he system, identify thes e warnin…
PVA Portal Manual
Revision I / January 2022
Page 7 of 106
Introduction
Before operating this system, read the operation and setup manual. This will help the user
to become familiar with the product and ensure successful operation.
If any questions or problems arise, contact PVA’s Technical Support department.
1.1 PVA Contact Information
Main Office PVA
6 Corporate Drive
Halfmoon, NY 12065
Tel +1-518-371-2684
Fax +1-518-371-2688
Website: http://www.pva.net
Email: info@pva.net
Technical Support
Tel +1-844-734-0209
Email: cs@pva.net
1.2 Document History
Revision
Revision Date
Reason for Changes
REV I
January 2022
Screenshot and General Content Updates
REV H
September 2016
FIS Update
REV G
2016
Part Manager and Quick Fid, Portal Version 1.2.0
REV F
2016
UV Warning Update
REV E
2014
Portal Version 1.1.0
REV D
2013
New Template
REV C
2012
Grammar revised, Portal Version 1.0.7
REV B
Content Update
REV A
Initial Release
Note: All photographs and CAD model representations in this document are a
“general representation” of the system and its components. The actual appearance
of the system and its components can differ based upon customer specific
configuration.
PVA Portal Manual
Revision I / January 2022
Page 8 of 106
1.3 Safety
Certain warning symbols are affixed to the machine and correspond to notations in this
manual. Before operating the system, identify these warning labels and read the notices
described below. Not all labels may be used on any specific system.
Always wear approved safety glasses when operating or working near the
workcell.
Before operating the system, read and understand the manuals provided
with the unit.
Never put hands or tools in areas with this symbol when the machine is in
operation. A dangerous condition may exist.
Read and understand the manuals provided with the unit before any repairs
or maintenance is done. Only a qualified individual should do service.
Use caution when there are pressurized vessels. Find and repair any leaks
immediately. Always wear appropriate safety equipment when working with
pressurized vessels or vessels that contain chemicals
Shear hazard from moving parts. Avoid contact.
Do not remove protective guarding.
In situations where inattention could cause either personal injury or damage
to equipment, a warning notice is used.
PVA Portal Manual
Revision I / January 2022
Page 9 of 106
Do not smoke near the machine. Always have a fire extinguisher available
for emergency use.
Before performing any repairs or maintenance to the system, turn off power
and lock out the power disconnect switch.
Warning notices are used to emphasize that hazardous voltages, current,
temperatures, or other conditions that could cause personal injury exist in
this equipment or may be associated with its use. Only qualified personnel
should enter areas designated with this symbol.
Laser light source present. Do not stare directly into the beam. Do not use in
the presence of highly reflective surfaces
Pinch hazard from moving parts. Avoid contact.
Hot surface. Avoid contact.
Warning, Ultraviolet (UV) light hazard. Do not look directly at the UV light
source.
This product meets EU standards for health, safety, and environmental
protection.
Warning, no open flames.
Electrostatic sensitive device warning. Observe precautions for handling.