MD600 Series Compact AC Drive Hardware Guide-EN-B06.PDF - 第14页
Fundamental Safety Instructions ‑13‑ Storage and transportation ● Large or heavy equipment must be handled by qualified professionals using specialized hoisting equipment. Failure to comply could result in personal injur…
Fundamental Safety Instructions
‑12‑
Unpacking
● Do not install the product in the case of any damage, rust, or signs of use on the
product or accessories upon unpacking.
● Do not install the product in the case of water seepage into the product or missing or
damaged components upon unpacking.
● Do not install the product in the case of any discrepancy between the product you
received and the product name on the packing list.
● Check whether the packing is intact and whether there is damage, water seepage,
dampness, and deformation before unpacking.
● Unpack the package layer by layer. Do not strike the package violently.
● Check for damage, rust, or dents on the surfaces of the product and accessories upon
unpacking.
● After unpacking, check the contents against the packing list to ensure that the
equipment and accessories are in the correct quantities, and that all documentation is
complete.
Fundamental Safety Instructions
‑13‑
Storage and transportation
● Large or heavy equipment must be handled by qualified professionals using
specialized hoisting equipment. Failure to comply could result in personal injury or
equipment damage.
● Before hoisting the equipment, ensure that components such as the front cover and
terminal blocks are secured firmly with screws. Loosely connected components may
fall off and result in personal injury or equipment damage.
● Do not stand or stay below the product which is being hoisted.
● When hoisting the equipment with a steel rope, ensure the equipment is hoisted at a
constant speed without suffering from vibration or shock. Do not turn the equipment
over or let the equipment stay hanging in the air. Failure to comply could result in
personal injury or equipment damage.
● Handle the equipment with care and mind your step during transportation to prevent
personal injury or equipment damage.
● When carrying the equipment with bare hands, hold the equipment casing firmly with
care to prevent parts from falling. Failure to comply could result in personal injury.
● Store and transport the equipment based on the storage and transportation
requirements. Failure to comply could result in equipment damage.
● Do not store or transport the equipment in locations where the equipment may be
exposed to splashing water or rain, direct sunlight, strong electric field, strong
magnetic field, or strong vibration.
● Store the equipment for up to three months. Take stricter protective measures and
carry out the necessary inspections for a longer storage time.
● Pack the equipment securely and properly before transportation. Use a fully enclosed
container for long-distance transportation.
● Do not transport the equipment with other devices or items that may impact or cause
harm to the equipment.
Fundamental Safety Instructions
‑14‑
Installation
● Ensure peripheral power distribution requirements are met, and select air switches,
fuses, cables, and cable terminals correctly.
● Use standard torque for screw fastening, and use appropriate terminal crimping
design for crimping terminals.
● Ensure heat dissipation requirements are met and design inlet and outlet airflow duct
properly.
● Avoid environments with dripping water, conductive foreign objects (such as carbon
fiber filaments, conductive metal dust, metal chips), and salt spray.
Failure to follow the above instructions will pose a fire risk.
● This equipment must be operated only by trained and qualified electrical personnel.
Operations can be performed by professionals only.
● Read through the guide and safety instructions before installation.
● Do not install this equipment in places with strong electric or magnetic field.
● Before installation, check that the mechanical strength of the installation site can bear
the weight of the equipment. Failure to comply may result in mechanical hazards.
● Do not wear loose clothes or accessories during installation. Failure to comply may
result in an electric shock.
● When installing the equipment in an enclosed environment (such as a cabinet or
case), use cooling devices (such as fans or air conditioners) to cool the space and
meet the installation environment requirements. Failure to do so can result in
equipment overtemperature or fire accidents.
● Do not retrofit the equipment.
● Do not fiddle with the bolts used to fix equipment components or the bolts marked in
red.
● When the equipment is installed in a cabinet or terminal device, appropriate guard
devices (guards for fire, electrical, and mechanical protection) meeting applicable IEC
standards and local laws and regulations must be provided.
● Before installing devices with strong electromagnetic interference, such as a
transformer, install a shielding device for the equipment to prevent malfunction.
● Install the equipment onto an incombustible object such as a metal. Keep the
equipment away from combustible objects. Failure to comply may result in a fire.
The edges of the equipment metal enclosure are sharp. Note the following
precautions during installation to avoid personal injury or cable damage:
● When performing installation, handling, or maintenance operations, always wear cut-
resistant gloves.
● Avoid direct skin contact with enclosure edges and cut surfaces during operation.