MD600 Series Compact AC Drive Hardware Guide-EN-B06.PDF - 第5页
‑ 4 ‑ Preface Date Version Revision January 2026 B04 Update: ● Updated the function descriptions of CN1 and CN2 terminals and the S4 DIP switch in "6.3.1 Descriptions of Control Circuit Terminals " on page 67 .…
‑3‑
Preface
Revision history
Date
Version Revision
August 2026
B06
Added:
● New content
"6.5 Grounding requirements
"
on
page 79
● Added section "Maintenance and Repair".
Update:
● Updated section "Safety Precautions".
● Updated "Speed of three-phase AC
asynchronous motor" to "Speed of three-phase
AC asynchronous and synchronous motors" in
"2.1 Product Overview
"
on page 21
.
● Changed "MD-BP-M External Operating Panel" to
"External Operating Panel" in
" System
Connection
"
on page 26
.
● Updated the diagrams of DIP switches S3 and S4
in
" Electrical wiring diagram
"
on page 28
.
● Moved the fan removal and installation
instructions from
"4.5.2.2 Fan Design
"
on page 43
to section "Replacing the Cooling Fan".
● Modified the power supply symbol in the sink
wiring diagram using the internal/external 24 V
power supply in
"6.3.2 Wiring Descriptions of
Control Circuit Terminals
"
on page 72
.
● Added item 12 in
"6.6 Post-wiring Inspection
"
on
page 80
.
● Changed "AO1: 0 V to 10 V/0 mA to 20 mA" to
"AO1: 0 V to 10 V" and added short-circuit rating
value 5 kA in
"11.4 General Specifications
"
on
page 96
.
● Updated
"12.7 Braking Resistor
"
on page 116
.
March 2026
B05
Deleted the description of modifiable through
parameters for the maximum output frequency
from
"11.3 Electrical Specifications
"
on page 94
.
‑4‑
Preface
Date
Version Revision
January 2026
B04
Update:
● Updated the function descriptions of CN1 and
CN2 terminals and the S4 DIP switch in
"6.3.1
Descriptions of Control Circuit Terminals
"
on page
67
.
● Updated the RS485 bus connection topology
structure and CAN bus connection topology
structure.
● Updated the selection table for braking resistors
(three-phase 380 V to 480 V and single-phase
200 V to 240 V) in
"12.7 Braking Resistor
"
on page
116
.
● Made minor corrections.
July 2025
B03
● Added installation environment requirements in
"5.1.1 Installation Environment Requirements
"
on
page 56
.
● Updated the selection table for the braking
resistor in
"12.7 Braking Resistor
"
on page 116
.
‑5‑
Preface
Date
Version Revision
September 2024
B02
Update:
● Updated
"2.3 Product Model List
"
on page 23
.
● Updated
"6.3.1 Descriptions of Control Circuit
Terminals
"
on page 67
.
● Updated
"6.3.2 Wiring Descriptions of Control
Circuit Terminals
"
on page 72
.
● Updated
"11.4 General Specifications
"
on page
96
.
● Updated
"12.9.1 Main circuit cable
"
on page 125
.
● Updated
"12.9.2 Control Circuit Cables
"
on page
127
.
● Updated
"12.3 Circuit Breaker and Fuse (CE)
"
on
page 107
.
● Updated
"12.7 Braking Resistor
"
on page 116
.
● Made minor corrections.
Added:
● Shipment Check
● Power Supply Compatibility Check
● Unpacking, Storage, and Transportation
● AC Drive Installation
● Added "AC Drive Wiring"
March 2024
B01
Added specifications related to 5.5 kW models.
Added the MD-BP-M operating panel.
Optimized descriptions of the vibration and shock
resistance function in section Installation
Environment.
Made minor corrections.
Note: To support the MD-BP-M operating panel,
the MD600 software version must be A2-22 =
60.02/A2-23 = 61.02/A2-24 = 0.28/A2-25 = 0.31 or
later. If the current MD600 software version does
not support the MD-BP-M, contact the service
personnel of the manufacturer to upgrade the
software.