MD600 Series Compact AC Drive Hardware Guide-EN-B06.PDF - 第20页
Fundamental Safety Instructions ‑19‑ Disposal ● Dispose of the retired equipment in accordance with applicable national regulations and standards. Failure to comply can result in property damage, personal injury, or deat…
Fundamental Safety Instructions
‑18‑
Maintenance
● Equipment installation, wiring, maintenance, inspection, or parts replacement must
be performed only by professionals.
● Do not perform maintenance on the equipment with power-on. Failure to comply may
result in an electric shock.
● Before maintenance, disconnect all the power supplies of the equipment and wait for
at least the time specified on the warning label.
● When using a permanent magnet (PM) motor, do not touch the motor terminals while
the motor is rotating, because induced voltage may be present at the terminals even
after the product is powered off. Failure to comply may result in electric shock.
● Perform routine and periodic inspection and maintenance on the equipment
according to maintenance requirements and keep a maintenance record.
Repair
● Equipment installation, wiring, maintenance, inspection, or parts replacement must
be performed only by professionals.
● Do not repair the equipment with power-on. Failure to comply may result in electric
shock.
● Before inspection or repair, disconnect all the power supplies of the equipment and
wait for at least the time specified on the warning label.
● Submit a request for repair based on the warranty agreement.
● When the fuse is blown or the circuit breaker or earth leakage current breaker (ELCB)
trips, wait for at least the time specified on the warning label before power-on or
other operations. Failure to comply may result in personal injury or death and
equipment damage.
● Troubleshooting and repair of a faulty or damaged equipment must be performed by
professionals based on the repair instructions, with the repair records kept properly.
● Replace quick-wear parts of the equipment according to the replacement instructions.
● Do not use damaged equipment. Failure to comply can result in death, personal
injury, or severe equipment damage.
● Recheck the wiring and reset the parameters after equipment replacement.
Fundamental Safety Instructions
‑19‑
Disposal
● Dispose of the retired equipment in accordance with applicable national regulations
and standards. Failure to comply can result in property damage, personal injury, or
death.
● Recycle retired equipment in accordance with industry waste disposal standards to
avoid environmental pollution.
Safety Label
To ensure safe operation, comply with equipment-related safety labels. The following
table describes the meanings of the safety labels.
Safety Label Description
● Before using the equipment, read the guide and safety precautions
carefully. Failure to comply may result in personal injury, death, or
equipment damage.
● Do not touch the terminals or remove the cover with power-on or
within 10 min after power-off. Failure to comply may result in electric
shock.
1.2 Industrial Information Security
The product provides interfaces for network connection and data transmission. To protect
factories, systems, machines, and networks from cyberattacks, it is essential to
implement proper protection mechanism for industrial security.
Customers are responsible for providing and maintaining a secure connection between
the product and their network or any other network to protect their factories, systems,
machines, and networks from unauthorized access. Such systems or machines can be
connected to an enterprise network or the Internet only when a secure connection is
established and appropriate security measures (such as using antivirus software or
installing firewalls) are in place.
Inovance continuously develops and improves its products and solutions to enhance
safety. It is strongly recommended that you update the product promptly and always use
the latest version.
Fundamental Safety Instructions
‑20‑
Malware (such as viruses, Trojans, and worms) can bring the device into an unsafe oper-
ating state, resulting in death, serious injury, and property damage. Observe the follow-
ing precautions:
● Always use the latest software version. If the product version is no longer
supported or the latest version is not used, you will be exposed to increased risk
of cyber attacks.
● Develop and maintain appropriate protective measures (including but not
limited to antivirus software, firewalls, WAF, IPS/IDS, situational awareness
system, identity authentication, and data encryption) to prevent the files in
mobile storage devices from being damaged by malware, and to protect the
products, networks, systems, and interfaces from unauthorized access,
tampering, hacking, data leakage, or information theft.
● Check all safety-related interfaces and settings after commissioning.