00196962-04-BA-SX12-V2-EN.pdf - 第17页
User manual SIPLACE SX1/SX2 1 Introduction From software version SC 706.1 SP1 Version 10/2014 1.1 SIPLACE SX1/SX2 17 1.1.1 Overview of placem ent head configuration 1 Machine Placement head St andard cameras Options SIPL…
1 Introduction User manual SIPLACE SX1/SX2
1.1 SIPLACE SX1/SX2 From software version SC 706.1 SP1 Version 10/2014
16
The SIPLACE SX1 and SX2 placement machines demonstrate
– High precision,
– High configuration flexibility,
– Head and gantry modularity
– Placement performance up to the high end process range and
– A wide ranging component range from 03015 components to a size of
125 mm x 10 mm.
Three placement methods are possible for processing the components:
– Collect&Place,
– Pick&Place and
– A combination of Collect&Place and Pick&Place (mixed mode).
The SIPLACE SX1 placement machine consists of one gantry while the SIPLACE SX2 placement
machine has two gantries. The head and gantry modularity principle developed by SIPLACE al-
lows you to change placement heads and gantries quickly and easily. For an overview of the
placement head configuration, refer to section 1.1.1
from page 17.
These can be quickly and accurately positioned by linear motors, moving independently of one
another in the X and Y directions.
The SX1/SX2 machine supports use of either the SIPLACE single conveyor or the flexible dual
conveyor.
There are two locations available for supplying components. These can be fitted with component
trolleys and configured with up to 60 tracks.
Alternatively, you can also dock a waffle pack changer (WPC5 or WPC6) at each of the two loca-
tions. If a WPC5/WPC6 is set up at one of the locations, a component trolley with 30 tracks must
be configured for the other location.
User manual SIPLACE SX1/SX2 1 Introduction
From software version SC 706.1 SP1 Version 10/2014 1.1 SIPLACE SX1/SX2
17
1.1.1 Overview of placement head configuration
1
Machine Placement head Standard cameras Options
SIPLACE
SX1
C&P20 Component camera, type
23
– Component camera, type 41
CPP Component camera, type
30
– Stationary camera, type 33
TH Component camera, type
33
– Stationary camera, type 25 (only
at location 1)
SIPLACE
SX2
C&P20 / C&P20 Component camera, type
23
– Component camera, type 41
CPP / CPP
Component camera, type
30
– Stationary camera, type 33
CPP / TH
Component camera, type
30
Stationary camera, type 33
– Stationary camera, type 25 (only
at location 1)
TH / TH
Stationary camera, type 33 – Stationary camera, type 25 (only
at location 1)
1 Introduction User manual SIPLACE SX1/SX2
1.2 Machine description From software version SC 706.1 SP1 Version 10/2014
18
1.2 Machine description
1.2.1 The SIPLACE principle
The placement heads pick up the components from the feeder modules (fixed position) on the
component trolleys or from the trays of the waffle pack changer and then place the waiting boards.
The SIPLACE SX1/SX2 placement machine has one placement area and a single or dual con-
veyor. Two boards can be placed at the same time on dual conveyors.
The principle of "stationary component supply" and "stationary PCB", which have proven them-
selves in the other SIPLACE machines, offer a range of decisive benefits:
– Refilling components and splicing on tapes does not cause downtime.
– The vibration-free component feeder means that even the smallest components (e.g. 03015)
are picked up reliably.
– The PCB, which does not move during the placement process, prevents the components slip-
ping.
– The combination of placement heads with nozzle changers always guarantees an optimum
nozzle configuration for every placement process, thus minimizing traversing paths and opti-
mizing the placement sequence.
High flexibility, efficiency and reliable setups are the guarantee for top productivity in the SIPLACE
machines.
Minimum down times increase utilization and thus help to increase productivity.