00196962-04-BA-SX12-V2-EN.pdf - 第204页
4 Setting up and commissioning Us er ma nual SIPLACE SX1/SX2 4.3 Setting up the machine From software version SC 706.1 SP1 Version 10/2014 204 4.3.5 T ools and equipment Y ou will need the following tool s and equipment …
User manual SIPLACE SX1/SX2 4 Setting up and commissioning
From software version SC 706.1 SP1 Version 10/2014 4.3 Setting up the machine
203
4.3.3.2 Fitting the indicator lamp
Insert the indicator lamp into the hole until the lamp tube projects sufficiently into the terminal
beneath.
Connect the cable for the indicator lamps to the connector. The cable with connector is lo-
cated in the tube.
Tighten the two screws on the terminal so that the indicator lamp is clamped into place.
4.3.3.3 Fixing the monitors
Use the 4 fastening screws to fix the monitor to the monitor mount and then connect the cable.
Check the cable connections.
4.3.4 PCB conveyor height on the machine
The machine can be set to the following PCB conveyor heights:
900 mm ± 15 mm 4
930 mm ± 15 mm (standard height) 4
950 mm ± 15 mm (SMEMA height) 4
4
PLEASE NOTE
The PCB conveyor height is the distance between the top edge of the PCB conveyor belt
and the bottom edge of the machine feet.
4 Setting up and commissioning User manual SIPLACE SX1/SX2
4.3 Setting up the machine From software version SC 706.1 SP1 Version 10/2014
204
4.3.5 Tools and equipment
You will need the following tools and equipment to adjust the height of your machine:
– Combination wrench size 19, Item No. 03111261-01 (new)
– Or, optionally: Open double-ended ring spanner, size 20, Item No. 03080496-01
– Torque wrench with setting scale, Item No. 03080498-01 and extension 1/2 inch, Item No.
03080499-01
– Hexagonal screwdriver bit, size 12 Item No. 03080501-01
– Hexagonal screwdriver bit, size 14 Item No. 03080502-01
– Allen key, for hexagon socket head screws for fixing the machine feet with a grub screw
– Shaft spirit level (accuracy 0.02 mm/m), item no. 00353825-01
– Measuring device for machine alignment, Item No. 03075826-01
as support for the shaft spirit level used to align the gantries. 4
– SX machine alignment gauge 2 assembly, item no. 03077785-01
– SX machine alignment gauge 1 assembly, item no. 03077777-01
for alignment to the PCB conveyors in the line 4
– Fork lift truck (specification see 4.1.4.3 on page 186).
– Air cushion transport system: SIPLACE HSxx, Item No. 00119002-S01 (optional)
User manual SIPLACE SX1/SX2 4 Setting up and commissioning
From software version SC 706.1 SP1 Version 10/2014 4.3 Setting up the machine
205
4.3.6 Replacing machine feet (height adapter)
The machine stands on 4 feet ( height adapter) (see 1 in fig. 4.3 - 2, page 205 )
The corresponding height adapters are available for the various PCB conveyor heights.
4
Fig. 4.3 - 2 Machine height adapter
(1) Hexagon socket head screw for height adjustment
(2) Notch for fixture against falling (locking screw)
(3) Various height adapter dimensions
– Height adapter for PCB conveyor height 900 (Item No. 03067048-xx)
– Height adapter for PCB conveyor height 930 (Item No. 03067046-xx)
– Height adapter for PCB conveyor height 950 (Item No. 03065876-xx)
(3)
(1)
(2)