00196962-04-BA-SX12-V2-EN.pdf - 第94页

3 Technical data and assemblies User manual SIPLACE SX1/SX2 3.1 Performance data for SIPLACE SX1/SX2 From software version SC 706.1 SP1 Version 10/2014 94 3.1.2 Placement head - dat a 3 Component range *a 0.4 mm x 0.2 mm…

100%1 / 370
User manual SIPLACE SX1/SX2 3 Technical data and assemblies
From software version SC 706.1 SP1 Version 10/2014 3.1 Performance data for SIPLACE SX1/SX2
93
3 Technical data and assemblies
3.1 Performance data for SIPLACE SX1/SX2
3.1.1 Machine performance
3
Placement head types SIPLACE SpeedStar (C&P20)
SIPLACE MultiStar (CPP)
SIPLACE TwinStar (TH)
Placement performance
The placement performance is influenced by the different head combinations and head positions, plus the conveyor
configurations. Individual options and customized applications also influence the placement performance. On request,
SIPLACE can calculate the actual performance of your product on your machine configuration.
IPC value [components/h]
According to the vendor-neutral conditions of the IPC 9850 standard published by the Association of Connecting Elec-
tronics Industries.
SIPLACE benchmark value [components/h]
The SIPLACE benchmark value is measured during the machine acceptance tests. It corresponds to the conditions set
out in the SIPLACE scope of service and supply.
Theoretical maximum output value [components/h]
The theoretical maximum output value is calculated from the most favorable conditions for each machine type and set-
ting, and corresponds to the theoretical conditions normally used in the industry.
SIPLACE SX2 placement machine Placement area IPC value Benchmark value Theoretical value
C&P20 / C&P20 48,000 60,000 67,750
CPP / CPP
*a
38,000 46,000 56,000
CPP
*b
/ TH 23,100 27,000 31,000
TH / TH 10,200 11,000 13,000
SIPLACE SX1 placement machine Placement area IPC value Benchmark value Theoretical value
C&P20 24,000 30,000 33,875
CPP
a
19,000 23,000 28,000
TH 5,100 5,500 6,500
Placement positions 6,000 / gantry for the Collect&Place heads
2,000 / gantry for the TwinStar
*)a MultiStar CPP: low installation position
*)b MultiStar CPP: high installation position
3 Technical data and assemblies User manual SIPLACE SX1/SX2
3.1 Performance data for SIPLACE SX1/SX2 From software version SC 706.1 SP1 Version 10/2014
94
3.1.2 Placement head - data
3
Component range
*a
0.4 mm x 0.2 mm to max. 200 mm x 125 mm
Component height C&P20 4 mm
CPP
*b
6 mm
CPP
*c
8.5 mm to 11.5 mm
TH 25 mm (greater height on request)
X/Y accuracy
*d
C&P20 ± 41 μm (3σ), ± 55 μm (4σ) Component camera, type 23 (6 x 6)
C&P20 ± 41 μm (3σ), ± 55 μm (4σ) Component camera, type 41 (6 x 6)
CPP ± 41 μm (3σ), ± 55 μm (4σ) Component camera, type 30 (27 x 27)
CPP ± 34 μm (3σ), ± 45 μm (4σ) Component camera, type 33 (55 x 45)
TH ± 26 μm (3σ), ± 35 μm (4σ) Component camera, type 33 (55 x 45)
TH ± 22 μm (3σ), ± 30 μm (4σ) Component camera, type 25 (16 x 16)
Angular accuracy C&P20 ± 0.5° (3σ), ± 0.7° (4σ) Component camera, type 23 (6 x 6)
C&P20 ± 0.5° (3σ), ± 0.7° (4σ) Component camera, type 41 (6 x 6)
CPP
*e
± 0.4° (3σ), ± 0.5° (4σ) Component camera, type 30 (27 x 27)
CPP
*f
± 0.5° (3σ), ± 0.7° (4σ) Component camera, type 30 (27 x 27)
CPP ± 0.2° (3σ), ± 0.3° (4σ) Component camera, type 33 (55 x 45)
CPP
*g
± 0.4° (3σ), ± 0.5° (4σ) Component camera, type 30 (27 x 27)
TH ± 0.05° (3σ), ± 0.07° (4σ) Component camera, type 33 (55 x 45)
TH ± 0.05° (3σ), ± 0.07° (4σ) Component camera, type 25 (16 x 16)
*)a Please note that the placeable component range is also affected by the pad geometry, the customer-specific standards,
the component packaging tolerances and the component tolerances.
*)b CPP head: in low installation position (stationary component camera not possible).
*)c CPP head: in high installation position
*)d The accuracy value, measured using the vendor-neutral IPC standard.
*)e Component dimensions between 6 mm x 6 mm and 27 mm x 27 mm.
*)f Component dimensions smaller than 6 mm x 6 mm.
*)g Component dimensions between 6 mm x 6 mm and 27 mm x 27 mm.
User manual SIPLACE SX1/SX2 3 Technical data and assemblies
From software version SC 706.1 SP1 Version 10/2014 3.1 Performance data for SIPLACE SX1/SX2
95
3.1.3 PCB conveyor - data
3
Single conveyor Flexible dual conveyor Dual conveyor in single con-
veyor mode
Standard dimensions
(length x width)
50 mm x 50 mm to
450 mm x 560 mm
*a
50 mm x 50 mm to
450 mm x 260 mm
50 mm x 50 mm to
450 mm x 460 mm
Dimensions with “Long
Board”option
(length x width)
50 mm x 50 mm to
850 mm x 560 mm
50 mm x 50 mm to
850 mm x 260 mm
50 mm x 50 mm to
850 mm x 460 mm
Stationary conveyor side Right, left or outer
Automatic electrical
width adjustment
Standard
PCB thickness
Standard:
"Thick board" option
0.3 mm to 4.5 mm
2.0 mm to 6.5 mm
Clamping length of board 450 mm
Space for positioning
support pins
440 mm
PCB warpage See page 135
PCB weight
*b
Standard max. 2.0 kg max. 1.0 kg max. 2.0 kg
Clearance on PCB under-
side
*c
25 mm
PCB conveyor height
Option:
Standard:
SMEMA option:
900 mm
930 mm
950 mm
Type of interface:
Standard:
Option:
SMEMA
Siemens
Component-free PCB
handling edge
3.0 mm
PCB changeover time
Single conveyor
Dual conveyor
*d
< 1.5 seconds
0 seconds
*)a When using board widths > 450 mm, make sure that the peripheral modules can also process these board
widths.
*)b The board weight value refers to the weight of the board plus the weight of the components.
*)c The free positioning of support pins is limited by the stop bar.
*)d 0 seconds in asynchronous mode, otherwise 1.5 seconds.
Important notes
When setting up a machine (S; F-, HS-, HF-, X- or D-Series) next to a SIPLACE SX, be aware that there is limited room between the two
machines. In these cases, use suitable conveyor extensions to create room of 0.5m for the operator between the two machines.