00196962-04-BA-SX12-V2-EN.pdf - 第54页
2 Operational safety User manual SIPLACE SX1/SX2 2.3 Laser classification From software version SC 706.1 SP1 Version 10/2014 54 2.3 Laser classification 2.3.1 Laser class 1 2.3.1.1 Classification of the whole mac hine 2 …
User manual SIPLACE SX1/SX2 2 Operational safety
From software version SC 706.1 SP1 Version 10/2014 2.2 Warning labels
53
2.2.9 Warning label on PCB conveyor
2
Fig. 2.2 - 12 Warning label "Sensitive conveyor sides" on clamping plate of PCB conveyor
2.2.9.1 Warning label "Sensitive conveyor sides"
2
Item no. 03110412-01 (1 on each conveyor side and placement area)
Sensitive conveyor sides!
The conveyor sides are highly sensitive and may not be moved
unless the brakes have been released.
Moving the sides without releasing the brakes can cause irrepa-
rable damage to the conveyor sides.
2 Operational safety User manual SIPLACE SX1/SX2
2.3 Laser classification From software version SC 706.1 SP1 Version 10/2014
54
2.3 Laser classification
2.3.1 Laser class 1
2.3.1.1 Classification of the whole machine
2
2
2.3.1.2 Classification of the camera systems
2
2.3.2 Laser class 1M
Do not look directly at this with optical instruments!
2
2
All installed camera systems and the whole machine when ready
for operation are assigned to laser class 1.
The laser classes are determined according to DIN EN 60825-1.
PLEASE NOTE
Modules in laser classes 1 and 1M are not identified.
2
The following camera systems are assigned to laser class 1:
– Stationary cameras
Stationary component camera P&P, type 33, 55 x 45, digital
Stationary component camera P&P, type 25, 16 x 16, digital
2
The following camera systems are assigned to laser class 1M:
– Component camera C&P, type 23, 6 x 6 on SpeedStar
– Component camera C&P, type 41, 6 x 6 on SpeedStar
– Component camera C&P, type 30, 27 x 27 on MultiStar
– Component Camera C&P, Type 30, 18 x 18 on a 12 Segment Collect&Place
Head
User manual SIPLACE SX1/SX2 2 Operational safety
From software version SC 706.1 SP1 Version 10/2014 2.4 Safety instructions for transporting the machine
55
2.3.3 Laser class 2
The following modules are assigned to laser class 2:
– PCB barcode scanner
– Component sensor on SpeedStar
– Component sensor on MultiStar
(The entire machine is classified as laser class 2 if the coplanarity laser module option is installed.)
2
2.4 Safety instructions for transporting the machine
2
Use a fork-lift truck with the following specification to carry the machine:
Fork length: Min. 1800 mm
Carrying power: Min. 6,000 kg
Clear width between forks: Min. 350 mm 2
2
2
Laser radiation
Do not look into beam!
WARNING
Risk of tilting!
Risk of tilting, if the required specifications for the fork-lift truck are not observed.
Only use the specified fork-lift for transportation.
Proper transportation of the machine is described in chapter 4
, section 4.1, page 183.