00196962-04-BA-SX12-V2-EN.pdf - 第298页

6 Station extensions User ma nual SIPLACE SX1/SX2 6.1 Nozzle changer From software version SC 706.1 SP1 Version 10/2014 298 6.1.2.4 Assembly In SX machines, the nozzle changer s are fixed to the component trolley COT ins…

100%1 / 370
User manual SIPLACE SX1/SX2 6 Station extensions
From software version SC 706.1 SP1 Version 10/2014 6.1 Nozzle changer
297
6.1.2.3 Position of nozzle changer for the SIPLACE MultiStar in the SX machine
6
Fig. 6.1 - 9 Position of nozzle changer for the SIPLACE MultiStar - example
6
(1) Component trolley in the inner position
(2) Component trolley in the outer position
(NC) Nozzle changer
(PA) Placement area
(1)
(2)
6 Station extensions User manual SIPLACE SX1/SX2
6.1 Nozzle changer From software version SC 706.1 SP1 Version 10/2014
298
6.1.2.4 Assembly
In SX machines, the nozzle changers are fixed to the component trolley COT insert. Other nozzle
changers can also be installed.
6
Fig. 6.1 - 10 Assembly position of nozzle changer - view from below
(1) Sloping side points towards the component trolley COT insert
(2) Vertical side points towards the PCB conveyor
Align the nozzle changer so that the sloping side points towards the component trolley COT
insert.
6
WARNING
Risk of head crashes with mixed configurations!
There is a risk of head crashes with mixed configurations.
Only install the associated nozzle changer for each placement head, with the nozzle
magazines for the respective placement head.
(1)
(2)
User manual SIPLACE SX1/SX2 6 Station extensions
From software version SC 706.1 SP1 Version 10/2014 6.1 Nozzle changer
299
6.1.2.5 Notes on operation
When you fill a magazine with a certain nozzle type for the first time, attach an adhesive label
to identify the type.
6
Open the locking plate and place the nozzles in the nozzle holders.
Close the locking plate so that the nozzles cannot drop out of the magazines.
6
6
Programming the nozzle changer is described in the SIPLACE Pro user manual.
6.1.2.6 Changing the magazine
Press the lever (item 1 in fig. 6.1 - 11, page 300), to release the magazine from the balls of the
snap fasteners (item 5 in fig. 6.1 - 11
, page 300). Lift the magazine off the base.
6
6
PLEASE NOTE
Fill the magazines off the machine and always replace complete magazines.
CAUTION
Filling up magazines!
Before you fill magazines, make sure that all the nozzles on the Collect&Place head
have
been returned to their magazines.
PLEASE NOTE
Risk of jamming!
If components fall onto magazines, there is a risk that the locking plate could jam.
Do not allow components to drop onto the magazines.
You should therefore regularly clean the magazines and free locations.
WARNING
Risk of head crashes with protruding lever!
Any lever that is protruding over the magazine (item 1 in fig 6.1 - 11
) can result in a head
crash.
You should therefore make sure that the lever does not protrude over the magazines.