00196962-04-BA-SX12-V2-EN.pdf - 第25页
User manual SIPLACE SX1/SX2 1 Introduction From software version SC 706.1 SP1 Version 10/2014 1.4 Qualification and training of personnel 25 1.4 Qualification and training of personnel Personnel used for opera tion, prev…
1 Introduction User manual SIPLACE SX1/SX2
1.3 Line concept From software version SC 706.1 SP1 Version 10/2014
24
1.3.2 SIPLACE line and software solutions
SIPLACE provides comprehensive solutions based on modular software tools for SMT machines,
lines and production management: the SIPLACE software suite.
1.3.2.1 Product definition, optimization and line control
Fast, fault-free introduction of products and optimum utilization of production lines are essential to
maximize production output. The programs from the SIPLACE software suite allow you to easily
program products, fine-tune the programs you have created and then find the balance for them
within your SMT production lines.
1.3.2.2 Production monitoring & process control
To achieve the production targets that are set, it is important to constantly monitor and check the
production facilities. The SIPLACE software suite contains monitoring products tailored to suit the
user group. These signal immediately if limits are exceeded on the machine or the production line.
1.3.2.3 Setup verification & traceability
Setup errors lead to series errors. The user-friendly SIPLACE software programs help you to
avoid such errors, and thus ensure high quality in your electronics production.
1.3.2.4 The benefits of the SIPLACE software suite at a glance:
– Fast programming and error detection
– Reduces changeover times and stoppages
– Ensures optimum utilization of your production line's productivity
– Real-time information from the production area
– Incredibly fast distribution of information
– Optimum use of resources
– Timely notification when production materials need to be re-ordered
– Coordination of maintenance measures
User manual SIPLACE SX1/SX2 1 Introduction
From software version SC 706.1 SP1 Version 10/2014 1.4 Qualification and training of personnel
25
1.4 Qualification and training of personnel
Personnel used for operation, preventive maintenance, inspection and installation must hold the
relevant qualifications for the job. The user must keep tight control over their responsibilities, as-
signment and supervision. Any employee who does not have the relevant training must be trained
and given appropriate instruction. The instruction is to be given by trained and authorized person-
nel.
SMT Academy
The SMT Academy provides technical training courses for your team, covering everything from
basic SIPLACE operator training to advanced follow-up training for your experts. Our courses can
either be held at your company or at one of our SIPLACE training centers worldwide. In addition
to our range of standard training programs, we can also offer customized courses to meet your
individual requirements.
SIPLACE training courses are always on a modular basis. This means that you can either book a
standard course or compile your own training program with the individual topics required for your
production environment.
1
1
Training courses for SIPLACE SX
Special operator, maintenance and technical (system configuration and repairs) training courses
are available for the SIPLACE SX.
Standard courses for SIPLACE SX
– SIPLACE operator training
– SIPLACE minor and major maintenance train-
ing for SX
– SIPLACE technical training for SX
Advanced and customized courses for
SIPLACE SX
– SIPLACE SX advanced training modules
– SIPLACE SX upgrade training modules
Other training courses
– SIPLACE programmer training for SIPLACE
Pro
– SIPLACE Vision Training
– SIPLACE feeder care training
PLEASE NOTE
Operation of system only by qualified personnel
Only staff with the relevant qualifications may start up, operate or otherwise work on
the machine.
The qualification must be proven by means of training courses or instruction for the per-
sonnel.
1 Introduction User manual SIPLACE SX1/SX2
1.5 Operator levels From software version SC 706.1 SP1 Version 10/2014
26
1.5 Operator levels
Certain functions or menus may only be executed or accessed by specially trained personnel. A
differentiation is made between the following operator levels:
– Production
– Advanced production
– Service (customer)
– Service (SIPLACE)
The operator levels "Advanced production" and "Service (customer)" can be password protected.
The operator level "Service (SIPLACE)" is already password protected.
Production 1
This operator level includes those people who have been trained to operate the machine. These
people are authorized to use any functions associated with operating the machine and may call
up any menus needed to use the machine.
Advanced production 1
People with this operator level have completed special training and are authorized to perform
setup tasks e.g. creating setup configurations or determining Vision parameters etc.
Service (customer) 1
People with this operator level are specially trained technicians at the customer end, who can, for
example, define machine option settings.
Service (SIPLACE) 1
People with this operator level are trained to perform service work, such as the conversion and
retrofitting of machines.