00196962-04-BA-SX12-V2-EN.pdf - 第205页
User manual SIPLACE SX1/SX2 4 Setting up and commissioning From software version SC 706.1 SP1 Version 10/2014 4.3 Setting up the machine 205 4.3.6 Replacing machine feet (height adapter) The machine stan ds on 4 feet ( h…
4 Setting up and commissioning User manual SIPLACE SX1/SX2
4.3 Setting up the machine From software version SC 706.1 SP1 Version 10/2014
204
4.3.5 Tools and equipment
You will need the following tools and equipment to adjust the height of your machine:
– Combination wrench size 19, Item No. 03111261-01 (new)
– Or, optionally: Open double-ended ring spanner, size 20, Item No. 03080496-01
– Torque wrench with setting scale, Item No. 03080498-01 and extension 1/2 inch, Item No.
03080499-01
– Hexagonal screwdriver bit, size 12 Item No. 03080501-01
– Hexagonal screwdriver bit, size 14 Item No. 03080502-01
– Allen key, for hexagon socket head screws for fixing the machine feet with a grub screw
– Shaft spirit level (accuracy 0.02 mm/m), item no. 00353825-01
– Measuring device for machine alignment, Item No. 03075826-01
as support for the shaft spirit level used to align the gantries. 4
– SX machine alignment gauge 2 assembly, item no. 03077785-01
– SX machine alignment gauge 1 assembly, item no. 03077777-01
for alignment to the PCB conveyors in the line 4
– Fork lift truck (specification see 4.1.4.3 on page 186).
– Air cushion transport system: SIPLACE HSxx, Item No. 00119002-S01 (optional)
User manual SIPLACE SX1/SX2 4 Setting up and commissioning
From software version SC 706.1 SP1 Version 10/2014 4.3 Setting up the machine
205
4.3.6 Replacing machine feet (height adapter)
The machine stands on 4 feet ( height adapter) (see 1 in fig. 4.3 - 2, page 205 )
The corresponding height adapters are available for the various PCB conveyor heights.
4
Fig. 4.3 - 2 Machine height adapter
(1) Hexagon socket head screw for height adjustment
(2) Notch for fixture against falling (locking screw)
(3) Various height adapter dimensions
– Height adapter for PCB conveyor height 900 (Item No. 03067048-xx)
– Height adapter for PCB conveyor height 930 (Item No. 03067046-xx)
– Height adapter for PCB conveyor height 950 (Item No. 03065876-xx)
(3)
(1)
(2)
4 Setting up and commissioning User manual SIPLACE SX1/SX2
4.3 Setting up the machine From software version SC 706.1 SP1 Version 10/2014
206
4
Fig. 4.3 - 3 Machine feet (height adapter)
(1) 4 height adapters - for various heights
Push the forks of the fork lift under the machine. See also 4.3.2, on page 201.
With the fork-lift, raise the machine approximately 35 cm. You can now pull the height adapt-
ers down and out.
(1)
(1)
(1)