00196962-04-BA-SX12-V2-EN.pdf - 第329页
User manual SIPLACE SX1/SX2 6 Station extensions From software version SC 706.1 SP1 Version 10/2014 6.6 Docking station for the component trolley of the SIPLACE SX 329 6.6 Docking st ation for the component trolley of th…
6 Station extensions User manual SIPLACE SX1/SX2
6.5 PCB barcode scanner From software version SC 706.1 SP1 Version 10/2014
328
6.5 PCB barcode scanner
6.5.1 Description
The PCB barcode reader is used to automatically record and decode barcodes on PCBs. The
PCB barcode scanners are installed on a special frame on the input side of the placement ma-
chine on the PCB
conveyor. Depending
on the position of the barcode strips, the barcode scanner can be attached in a few simple
steps so that the strips can be read parallel to or across the PCB transport direction.
When using single conveyors, two board barcode readers can be retrofitted. These can either
scan the top or bottom of the boards.
When using dual conveyors, four board barcode readers can be retrofitted. These can scan both
the top or bottom of the boards on both conveyor lanes.
The following barcode readers are available:
– 2D board code reader
This code reader processes barcodes and matrix codes. Matrix code is primarily used when
there is
not enough space for barcode labels. 6
6.5.2 Technical data - 2D code reader
6
Dimensions (L x W x H)
55 x 42 x 22 mm
3
Weight 125 grams
Code types 2D Data Matrix ECC 0, 50, 80, 100, 140 and 200
Data Matrix ECC200
QR Code, MicroQR Code
Barcode length
Single conveyor
Dual conveyor, asynchronous
Dual conveyor, synchronous
Max. 40 characters
Max. 40 characters
Max. 40 characters
Data interface RS232, USB 2.0
Electrical connection 15-pin D-Sub HD connector
Operating voltage 5 V- to 24 V-
User manual SIPLACE SX1/SX2 6 Station extensions
From software version SC 706.1 SP1 Version 10/2014 6.6 Docking station for the component trolley of the SIPLACE SX
329
6.6 Docking station for the component trolley of the
SIPLACE SX
6.6.1 Overview
The docking station is an additional component for the setup area. It forms the link between the
setup area and the component trolley for the SIPLACE SX1/SX2 and X-Series. The docking sta-
tion allows the component trolleys to be set up with feeder modules and function tests and setup
checks to be carried out externally. The component trolley can be used with 30, 40 or 60 tracks.
The appropriate separating modules will be needed where relevant.
For a detailed description, see the "Operating guide Docking Station for Component Trolleys in
SIPLACE SX", Item No. 00196691-xx]
6
Fig. 6.6 - 1 Docking station, SIPLACE SX-Series
(1) Docking station
(2) Component trolley (with 60 tracks)
(1)
(2)
6 Station extensions User manual SIPLACE SX1/SX2
6.6 Docking station for the component trolley of the SIPLACE SX From software version SC 706.1 SP1 Version 10/2014
330
6.6.2 Technical data
6
Fig. 6.6 - 2 Docking station, SIPLACE SX-Series - dimensions
6
L1 Length 1038 mm
L2 Width 801.5 mm
L3 Height to centering pin 859 mm for 900 mm PCB conveyor height
889 mm for 930 mm PCB conveyor height
909 mm for 950 mm PCB conveyor height
Weight
Compressed air pressure values p
min
0.5 MPa (5.0 bar)
p
max
1.0 MPa (10.0 bar)
Compressed air connection Connection plug KS 2-M5-A
Rate of flow
*a
5 Nl/min
Supply voltage 88 - 264 V~
Frequency max. 63 Hz
Rated current max. 2 A
Performance 0.23 kW
Fuse 2 x 8 A
*)a Under normal atmospheric conditions at 20°C and 1013 hPa