00191913-01.pdf - 第170页

4 Placement functions User Manual SIPLACE 80S-20/F4 4.3 Feeders Software Version SR.406.xx 02/2000 Issue US 168 4.3.5.6 F eed tray This allow s you t o define the l evel co ntaining the waffle pack tray to be m ade avail…

User Manual SIPLACE 80S-20/F4 4 Placement functions

Software Version SR.406.xx 02/2000 Issue US 4.3 Feeders

167

4.3.5.2 Quit refill position

Å Click on the Quit refill position button.

The waffle pack trays specified in the setup are moved to, checked and aligned.

4.3.5.3 WPC refilled

As soon as the waffle pack trays which have been identified as being "empty" have been refilled

with components, this must be confirmed, so that the placement head can again access these

trays. This is done using the "WPC refilled" function. 4

Å Click on the WPC refilled button.

This confirms that the waffle pack trays have been refilled.

All the waffle pack trays which have been identified as being "empty" are now regarded as

"full". Placement continues with components from these waffle pack trays.

4.3.5.4 WPC reference run

This function causes the lift of the waffle pack changer to carry out a reference run. 4

NOTE

The waffle pack changer must not be in the refill position when this function is carried out. 4

Å Click on the Stop processing PCB function in the Mode menu.

The current placement operation is halted.

Å Click on the WPC reference run button.

First, any waffle pack tray which has been moved out will be returned to its level. The reference

run is then performed.

4.3.5.5 Transport position

To allow the waffle pack changer to be transported safely, the lift of the waffle pack changer must

be moved to a defined transport position. 4

NOTE

The waffle pack changer must not be in the refill position when this function is carried out. 4

Å Click on the Stop processing PCB function in the Mode menu.

The current placement operation is halted.

Å Click on the Transport position button.

The lift moves to the defined safety/transport position.

4 Placement functions User Manual SIPLACE 80S-20/F4

4.3 Feeders Software Version SR.406.xx 02/2000 Issue US

168

4.3.5.6 Feed tray

This allows you to define the level containing the waffle pack tray to be made available for place-

ment. 4

NOTE

The waffle pack changer must not be in the refill position when this function is carried out. 4

Å Click on the Feed tray button.

The following dialog box is displayed.

Å In the text box, enter the number of the required level and confirm your entry with OK. The waf-

fle pack changer moves the waffle pack tray from the selected level to the pick-up position.

NOTE

If a waffle pack tray is already in the pick-up position, it is first moved to its defined level. 4

User Manual SIPLACE 80S-20/F4 5 Single functions

Software Version SR.406.xx 02/2000 Issue US 5.1 General comments

169

5 Single functions

5.1 General comments

Gantry functions and transport functions are known as single functions. They are used to set up

and test the machines and to carry out particular actions following a machine shutdown caused

by an error.

Single functions can be used to control various function modules in a defined manner.

WARNING

Single functions may only be executed by appropriately qualified and trained personnel, since

improper handling can result in personal injury/damage to the machine.