00191913-01.pdf - 第63页

User Manual SIPLACE 80S-20/F4 1 Introduction Software version SR.406.xx 02/2000 Issue US 1.15 Overview of the modules - PCB conveyor 61 The conve yor belts are d riven b y DC motor s. The lifti ng table nea r the cen ter…

1 Introduction User Manual SIPLACE 80S-20/F4

1.15 Overview of the modules - PCB conveyor Software version SR.406.xx 02/2000 Issue US

1.15 Overview of the modules - PCB conveyor

1.15.1 Structure of the PCB conveyor

The machine is supplied with a single conveyor as standard. The dual conveyor is available as an

option. The left or the right side of the PCB conveyor can be used as the stationary side, as re-

quired. 1

Fig. 1.15 - 1 PCB conveyor - single conveyor

(1) Input conveyor (2) Center conveyor

(3) Output conveyor (4) Lifting table

(5) Width adjustment T PCB transport direction 1

User Manual SIPLACE 80S-20/F4 1 Introduction

Software version SR.406.xx 02/2000 Issue US 1.15 Overview of the modules - PCB conveyor

The conveyor belts are driven by DC motors. The lifting table near the center conveyor clamps the

PCBs in position. The width of the PCB conveyor can be adjusted, either using the menu or from

the line computer. 1

1.15.2 Technical data – single conveyor

1.15.3 Technical data – dual conveyor

PCB format

50mm x 50mm to 460mm x 460mm

2" x 2" to 18" x 18"

Optionally:up to 508mm x 460mm

up to 20" x 18 "

PCB thickness 0.5mm to 4.5mm

Max. PCB warpage

On top: 4.5mm - PCB thickness

On bottom: 0.5mm + PCB thickness

Clearance on PCB underside 25mm (standard), 40mm (option)

PCB transport height

830mm ± 15mm (standard)

900mm ± 15mm (option)

930mm ± 15mm (option)

950mm ± 15mm (SMEMA: optional)

Fixed conveyor edge Right (standard), left (optional)

Type of interface Siemens (standard), (SMEMA: optional)

Component-free handling edge 3mm

PCB changeover time 2.5 s

PCB format

50mm x 50mm to 460mm x 216mm

2" x 2" to 18" x 8.5"

Optionally:up to 508mm x 216mm

up to 20" x 8.5 "