00191913-01.pdf - 第40页
1 Introduction User Manual SIPLACE 80S-20/F4 1.7 Electrical and pneumatic connection points Software version SR.406.xx 02/2000 Issue US 38 1.7 Electrica l and pneumatic connection point s 1 Fig. 1.7 - 1 Electrical and pn…
User Manual SIPLACE 80S-20/F4 1 Introduction
Software version SR.406.xx 02/2000 Issue US 1.6 The line concept
37
1.6 The line concept
1.6.1 Overview
The machine can be linked to input/output stations, screen printing systems, soldering ovens and
other machines from the SIPLACE range (HS-50, S-20, F
4
, F
5
/F
5
HM, and the SIPLACE G adhe-
sive application station). All SIPLACE modules are supplied with the necessary data by the UNIX
line computer. The placement machine can also be linked to a higher level data processing system
through the use of suitable interfaces. 1
1.6.2 Technical data – line concept
1
*) SIPLACE HS-50, SIPLACE 80 S-20, SIPLACE 80 S-23 HM or SIPLACE 80 F
4
with 12-segment
revolver head 1
**) SIPLACE 80 F
4
/F
5
/F
5
HM 1
1
1
System SIPLACE placement lines
Modules SIPLACE HS-50 / SIPLACE 80 S-20 / SIPLACE S-23 HM
SIPLACE 80 F
4
/ SIPLACE F
5
/ SIPLACE F
5
HM
Peripherals Input/output stations
Screen printers
Soldering ovens
Inspection stations, etc.
Component range From 0402 * to 55 mm x 55 mm **
PCB conveyor Automatic width adjustment
PCB format 50 mm x 50 mm to 460 mm x 460 mm
Placement rate Depends on how the modules are connected to one another
Space required 4 m² / SIPLACE 80 module
7.5 m² / SIPLACE HS-50 module
1 Introduction User Manual SIPLACE 80S-20/F4
1.7 Electrical and pneumatic connection points Software version SR.406.xx 02/2000 Issue US
38
1.7 Electrical and pneumatic connection points
1
Fig. 1.7 - 1 Electrical and pneumatic connection points on the machine
(1) Compressed air unit
(2) Connection for compressed air line
(3) Main power filter Z1
(4) Hole for power cable
(5) Service socket
(6) Compressed air connection for changeover table
(7) Power supply connection for changeover table
(8) Communications connection for changeover table
(9) LAN supply in control unit
(10) Main switch
User Manual SIPLACE 80S-20/F4 1 Introduction
Software version SR.406.xx 02/2000 Issue US 1.7 Electrical and pneumatic connection points
39
DANGER
The placement machine is supplied with 3 x 400 V or 3 x 208 V (US version) ± 5 %, 50/60 Hz
mains voltage. Consequently parts of these systems carry potentially lethal voltages, even when
switched off at the main switch. Incorrect handling of this placement machine can therefore result
in death or severe injury, or considerable damage to equipment. 1
WARNING
NEVER detach compressed air lines while they are still pressurized. Risk of injury. 1