00191913-01.pdf - 第28页
1 Introduction User Manual SIPLACE 80S-20/F4 1.4 Revision index Software version SR.406.xx 02/2000 Issue US 26 1.4 Rev ision index Firs t versio n User’s Manual SIPLACE 80S -20/F 4 Issue 11/ 95 Basic vers ion Use r’ s Ma…
User Manual SIPLACE 80S-20/F4 1 Introduction
Software version SR.406.xx 02/2000 Issue US 1.3 User classification
25
The line engineer 1
Line engineers have undergone special training, and are authorized to carry out line engineer ac-
tivities, such as creating set-up configurations, determining vision parameters, etc. 1
The service engineer 1
This class is reserved for Siemens engineers, who are trained to carry out servicing work, and to
upgrade and retrofit the placement machine. 1
WARNING
A thorough knowledge of the relevant part of this User Manual is required before carrying out any
work on the machine. All work must be carried out only by appropriately trained and qualified per-
sonnel. All warning, caution and danger notes MUST be observed. 1
PLEASE NOTE: The content of this User Manual is not part of or intended to modify a previous
or existing agreement, undertaking, or legal relationship. Any undertakings entered into by Sie-
mens AG result from the purchase contract, which also contains complete and generally applica-
ble guarantees. Such contractual guarantee provisions are neither extended nor restricted by the
information given in this User Manual. 1
1 Introduction User Manual SIPLACE 80S-20/F4
1.4 Revision index Software version SR.406.xx 02/2000 Issue US
26
1.4 Revision index
First version User’s Manual SIPLACE 80S-20/F
4
Issue 11/95
Basic version User’s Manual SIPLACE 80S-20/F
4
Issue 01/96
Revision of User’s Manual SIPLACE 80S-20/F
4
Issue 03/96
Revision of User’s Manual SIPLACE 80S-20/F
4
Issue 06/96
Revision of User’s Manual SIPLACE 80S-20/F
4
Issue 03/97
Revised version of User’s Manual SIPLACE 80S-20/F
4
/F
4
-6 Issue 07/97
Revision of User’s Manual SIPLACE 80S-20/F
4
/F
4
-6/F
5
Issue 03/98
Revision of User’s Manual SIPLACE 80S-20/F
4
/F
5
Issue 05/99
Revision of User’s Manual SIPLACE 80S-20/F
4
, SR.406.xx Issue 02/00
1.4.1 Survey of the revisions in the 03/96 issue
1.4.2 Survey of the revisions in the 06/96 issue
Revised functions Chapters / Sections affected
Nozzle, type 412, for flip chips 11.5; 17.2
Nozzle contour diagrams 17.1
Overview of nozzles 17.2
PCB barcode configured for COM 2 11.3
Maintenance of gantry / revolver head / IC head 9
Maintenance schedules 9
Setting the components illumination at the revolver head
camera
7.6.5
New functions Chapters / Sections affected
Multiple Bar code 5.4.2
Twin conveyor 6; 11(so far only the software
has been implemented)
Fluxing 11.7
Remote Service 11.8
GEM Interface 11.9
On-line help expansions 4
Diagnostics 19.2
Conveyor limit stop right / left LC UNIX User’s Manual
User Manual SIPLACE 80S-20/F4 1 Introduction
Software version SR.406.xx 02/2000 Issue US 1.4 Revision index
27
1.4.3 Survey of the revisions in the 03/97 issue
1.4.4 Overview of the revisions in the 07/97 issue
Revised functions Chapters / Sections affected
Notes on Touch Screen 2
Vision systems 7
Maintenance schedules 9
Maintenance of gantry / revolver head / IC head 9
Revised functions Chapters / Sections affected
Maintenance of empty tape cutter 9.1.4; / 9.2; / 9.3.4
Maintenance of components table 9.1.4; / 9.2; / 9.3.3
Maintenance of revolver head 9.1.4; / 9.2; / 9.5.6 Vacuum/
Forced air valves
New functions Affected Chapter / Section
6-nozzle revolver head (all functions) 0; 2; 3; 4; 5; 9; 17
Cover guard on input / output belt 1.2
Display PCB barcode 2; 3; 11
Starting SITEST from user interface
(operation and the range of functions are described in a
separate manual)
2.4.3
Omitting components 3
Approaching the set-up position 4.2.1; 4.3.1
Guidelines for describing case shapes 5.7
What needs to be done...? New chapter 6
Components > 12 mm 10.10
Twin conveyor, fixed left side 11.10
Revised functions Affected Chapter / Section
New breakdown into chapters Chapter 3 to 8 and 10
Overview and technical data, tape feeder modules 10.1