SIPLACE Vision Customer_en.pdf - 第174页
SIPLACE Pro 3.0 Programming Interface for Componen t Shapes Handling Component Programming Component Shape Data Download at Station S tudent Guide SIPLACE V ision (Customer) SIPLACE Pro 3.0 Programming Interface for Comp…
SIPLACE Pro 3.0 Programming Interface for Component Shapes
Influencing SIPLACE Vision Through Specific Programming Handling Component Programming
Student Guide SIPLACE Vision (Customer)
Edition 12/2008 EN SIPLACE Pro 3.0 Programming Interface for Component Shapes
173
7.4.6 Influencing SIPLACE Vision Through Specific Programming
If the pickup tolerance is set too low in the component shape or component feeders, the Region of
Interest (ROI) will also be too small and the CO will be rejected during reversed pickup procedures.
As a result, pickup displacement in the X/Y position will also be too limited.
If a smaller pickup tolerance is programmed in the feeder than in the CS, the smaller tolerance value will
apply.
7.4.7 Import from Fiducials During LCU Import
Select the menu LCU Import Wizard under Tools.
7.4.8 Component Shape Data Download at Station
The CS download at the X-series stations shows the assignment of component shapes as a complete
data path, with the individual component shape names.
The CS download at the HF-/HS-/S-/F-series stations shows the assignment of component shapes as
an equivalent number.
SIPLACE Pro:
CO 1 is assigned to CS „System\2000“
CO 2 is assigned to CS „System\2000“
CS „System\2000“ with LC equivalent number. 10500
HS machine:
CO 1 is placed with CS name „10500“
X machine:
CO 2 is placed with CS name „System\2000“
SIPLACE Pro 3.0 Programming Interface for Component Shapes
Handling Component Programming Component Shape Data Download at Station
Student Guide SIPLACE Vision (Customer)
SIPLACE Pro 3.0 Programming Interface for Component Shapes Edition 12/2008 EN
174
Appendix
Student Guide SIPLACE Vision (Customer)
Edition 12/2008 EN Appendix
175
8 Appendix
On the following pages you'll find programming charts.