SIPLACE Vision Customer_en.pdf - 第190页

Nozzle type picture order nr. (version nr. may change) Material / Used for.. (sample dimension.) min. comp. dimension (in mm) nozzle length (in mm) compone nt sensor all comp. vacuum difference (in mbar) Nozzle scanning …

100%1 / 206
Nozzle
type picture
order nr. (version
nr. may change)
Material / Used
for.. (sample dim.)
nozzle
length
(mm)
vacuum
difference
(in mbar)
Component height min./max
defined by R&D dep.(in mm)
817 00337584-03
Evoprene
15.4x10.3x2.5
(SO24L) until
17.6x17.6x4.35
(PLCC44)
12.5 200
1-4mm
820 00326123-04
ceramic 1,0x0.5mm
(0402)
NO Vacuum check
10.5 200
5-7mm
821 00326124-04
Evoprene
20x20x4.6
(PLCC52) until
27x27
9.25 200
4-8mm
516
the adapter
singular is
03011583-02
03012036-01
Vectra
20 450
the component bottom side is
adjusted to the correct focus
of stationary Camera by Z-
axis positioning.
517 03012042-01
Vectra
20 450
the component bottom side is
adjusted to the correct focus
of stationary Camera by Z-
axis positioning.
518 03012011-01
Evoprene
fixed membrane
18.7 450
the component bottom side is
adjusted to the correct focus
of stationary Camera by Z-
axis positioning.
519 03012034-01
Evoprene
membrane, fixed by
metal insert
18.7 450
the component bottom side is
adjusted to the correct focus
of stationary Camera by Z-
axis positioning.
the comp. is adjusted to the
correct focus (prog. or
measured nozzle length) of
the stat. camera. consider
special programming of
'vacuum cubic/Noncubic'
max. comp. Dimension Limits defined by TWIN and TWIN comp. Cam.(33) / FilpChip Camera
XxY 55x45mm / 16x16 for single measurement. Max. comp. Height 25mm.
special adapter for 9xx
nozzles on TWIN head
00330027-04 (with
front membrane)
max. comp. dimension Limits defined by C&P20 head and comp. Camera C&P20
XxYxH 6x6x4mm (! The pickuptol. is than limited to ~0.5mm!!)
max. comp. Dimension Limits defined by C&P12 head and comp. Camera C&P12
XxYxH 18.4x18.4x6mm (PLCC44)
max. comp. Dimension Limits defined by C&P6 head and comp. Camera C&P6
XxYxH 27x27x8.5mm (BGA 255_1.5/ BGA 372_1.25)
the 'TWINsleeve-Icnozzle' adapter
singular is 03011583-02
(see partially pictures above) Take care
on the (blue) front membrane!
The values of the 5xx nozzles are also valid for the IC-head without the TWIN-adapter than it is a 4xx nozzle.
(nozzle length here - 7mm)
Edition 5.0 print 18.11.2008 nozzle overview_cu_D_E.xls nozzle 8xx 5xx Siemens Ind.Sec. DT EA CS E
Nozzle
type picture
order nr.
(version nr.
may change)
Material / Used for..
(sample dimension.)
min. comp.
dimension
(in mm)
nozzle
length
(in mm)
compone
nt sensor
all comp.
vacuum
difference
(in mbar)
Nozzle
scanning
SipVision
Comp height
min./max defined by
R&D dep.(in mm)
1001 03013307-
ceramic
1.0x0.5 (0402) until
1.6x0.8 (0603) 0.85 x 0.35
9.8
q
20
q
0.3 - 1
1003 03015869-
ceramic 1,0x0.5mm
(0402) 0.85 x 0.35
9.8
q
10
q
0,25 - 0.5
1004 03015840-
ceramic
2.1x1.2 (0805) until
3.2x1.6 (1206) 1.7 x 0.95
9.4
q
80
q
0.35 - 1.8
1005
3056499-
(1hole series
since 604.0x)
ceramic 0.4x0.2mm
(01005)
10.4
q
1
q
0.25 - 0.35
1006 03015854-
ceramic
0.6x0.3mm (0201)
10.4
q
3
q
0.25 - 0.35
1007 03054812-
ceramic
1.0x0.5 (0402) until
1.6x0.8 (0603)
Is an exten-
tion for 901
for smaller
placement
gaps 0.85 x
0.35
9.8
q
20
q
0.3 - 1
1011 03013300-
Vectra
1.0x0.5 (0402)until
1.6x0.8 (0603) 0.85 x 0.35
9.8
q
20
q
0.3 -1
1014 03013303-
Vectra
2.1x1.2 (0805) until
3.2x1.6 (1206) 1.7 x 0.95
9.4
q
80
q
0.35 - 1.8
1028
Soko 03072639-01
Ceramic ESD save
1.0x0.5 (0402)
q
9.8 20
q
nozzle defined for
contact free pickup
(smaller wall thickness
than 925)
1032 03014327-
Evoprene
MiniMELF 3.0 x Ø 1.1
9.7
q
25
0 -1.7 about focus
height
Contact surface
rounding is optimized
to MiniMelf diameter
Ø 1.1 - 1.7
1033 03013425-
Evoprene
3.2x1.6x0.8 (1206)
and larger 2.8 x 1.2
8.7
q
100
0.9-2.3
1034 03013103-
Evoprene
MaxiMELF 3.0 x Ø 1.6
9.0
q
23
0.4 -2.4 about focus
height
Contact surface
rounding is optimized
to MaxiMelf diameter
Ø 1.6 - 2.4
1035 03015194-
Evoprene
Tantal C/D 3.0x1.4
8.4
q
110
1,2 - 3.0
1036 03014331-
Evoprene
MicroMELF 1,7 x Ø 0.9
9.6
q
50
0-1.8 about focus
height
Contact surface
rounding is optimized
to MicroMelf diameter
Ø 0.9 - 1.5
Edition 5.0 print 18.11.2008 nozzle overview_cu_D_E.xls C&P20 Nozzle param Siemens Ind.Sec. DT EA CS E
Nozzle
type picture
order nr.
(version nr.
may change)
Material / Used for..
(sample dimension.)
min. comp.
dimension
(in mm)
nozzle
length
(in mm)
compone
nt sensor
all comp.
vacuum
difference
(in mbar)
Nozzle
scanning
SipVision
Comp height
min./max defined by
R&D dep.(in mm)
1133 03014336-
Evoprene
Tantal 3.2x1.6A/B /
1206 2.8x1.2
9.4
q
100
0,5 - 2
1135 03015384-
Evoprene
Tantal C/D 3.0x1.4
7.4
q
110
3,0 - 4
1235 03015222-
Evoprene
4.5x3.2x1.6 until
5.7x5.0x1.7 (calib.
Part / ultra thin
components.) 3.0x1.4
9.4
q
110
0-2 (Please Note: approxim.
0.5mm higher component at this
nozzle interrupt the LASER
beam of the Comp. Sensor when
the Z-Axis is at top position.)
Component-Sensor works for all components up to specified maximum comp. height of 4mm.
Machine execute a vacuum check at reference run; but do not check comp. Presence with vacuum check.
Edition 5.0 print 18.11.2008 nozzle overview_cu_D_E.xls C&P20 Nozzle param Siemens Ind.Sec. DT EA CS E