MAN00000772_SI-G200BB_SVCPDFA.pdf - 第215页

Calibration HLGB-10304-01 Auto Calibration (Recognition of relationship betw een PWB coordinate and mechanism coordinat e) SHEET 5/7 3. Attach the positioning pins to loc k the jig. Before attaching the positioning pins,…

100%1 / 712
Calibration
HLGB-10304-01
Auto Calibration (Recognition of
relationship between PWB coordinate and
mechanism coordinate)
SHEET
4/7
2. Press the [ORG] button on the
operation panel with the Conv. Adj.
screen being displayed.
Conveyor return to origin.
3. Click the Return button to close the
Conv. Adj. screen.
7 Move the head clear of the work area.
1. Click in an order of AXIS MOTION
tabXY button.
XY Axis screen is displayed.
2. Operate the XY axis screen to move
the head to a position where working
can be easily performed.
Absolutely move the head to a position of X=100,
Y=300, then the subsequent working easily
becomes performed.
8 Install the ball point jig.
1. Clean surface of the ball point jig and
all of holes with waste cloth.
2. Position the ball point jig on the
conveyor rail referring to the pin
positions.
Ball point jig
Calibration
HLGB-10304-01
Auto Calibration (Recognition of
relationship between PWB coordinate and
mechanism coordinate)
SHEET
5/7
3. Attach the positioning pins to lock the
jig.
Before attaching the positioning pins, make sure
the base point jig is seated securely.
4. After attaching the positioning pins,
pull the jig slightly toward you so that
the jig comes parallel with the transfer
rail of the fixed side.
9 Display a Recognition of relationship
between PWB coordinate and mechanism
coordinate screen.
1. Click the Auto Calibration button on
the CALIBRATION screen.
Multi-functional machine calibration screen is
displayed.
2. Click the Recognition of relationship
between PWB coordinate and
mechanism coordinate button on the
Multi-functional machine calibration
screen.
Recognition of relationship between PWB
coordinate and mechanism coordinate screen is
displayed.
10 Start calibration for relationship between the
PWB coordinate and mechanical
coordinate.
1. Click the Start button of Sequence 1.
Positioning pin
Calibration
HLGB-10304-01
Auto Calibration (Recognition of
relationship between PWB coordinate and
mechanism coordinate)
SHEET
6/7
2. Press the [Start] button to start the
auto calibration.
Captive check screen for jig base position is
displayed.
3. Click the Yes button.
XY Axis screen is displayed.
4. Align the PWB camera to the
reference position on the front of the
locator pin while checking the
PCBOARD DISPLAY.
Align cross-hair line on the PCBOARD
DISPLAY to the center of the hole of the
reference position by jog move.
5. The calibration starts when you click
the Return button on the XY Axis
window.
Wait until the calibration process ends.
PWB camera
Reference
position
Locator pin
Hole of reference
position
Cross-hair line