4OM-1345-009_w.pdf - 第130页

2-5 AKHEMT -ID W arning Codes Display Field A (Scope of W arning Messages) Display Field B (Details of W arning Messages) 010f01 PCB existence Please remove the PCB on the conveyor . 010f02 PCB existence Please remove th…

2-4

AKHEMT-ID

2.2 List of Warning Messages

Table 4B1

Warning Codes Display Field A (Scope of Warning Messages)

Display Field B (Details of Warning Messages)

010101 Emergency Stop

Press [POWER ON] button to activate Load Power circuit.

010201 Air Pressure Drop

Increase air pressure and press the [POWER ON] button to power up the machine.

010301 Safety cover

Please close and lock the safety cover.

010401 Safety cover lock conﬁ rm

Please close and lock the safety cover.

010501 Beam XY main loop OFF

Press [POWER ON] button to activate Load Power circuit.

010601 Head main Loop OFF

Press [POWER ON] button to activate Load Power circuit.

010701 Stage is not ready

Please close and lock the safety cover.

010801 Feeder base is not connected.(rear)

Please connect the feeder base.

010901 Feeder base is not connected.(front)

Please connect the feeder base.

010a01 Vacuum pump

Please turn on the vacuum pump.

010b01 Feeder is not ready (rear)

Please turn on the Feeder Ready SW (rear).

010c01 Feeder is not ready (front)

Please turn on the Feeder Ready SW (front).

010d01 Pattern program is not set

Please set the patterm program

010e01 Auto setup not ﬁ nish

Please remove the PCB on equipment and execute the automatic arrangement.

0602-001

2.2 List of Warning Messages

2-5

AKHEMT-ID

Warning Codes Display Field A (Scope of Warning Messages)

Display Field B (Details of Warning Messages)

010f01 PCB existence

Please remove the PCB on the conveyor.

010f02 PCB existence

Please remove the PCB on the NL conveyor.

010f03 PCB existence

Please remove the PCB on the NA conveyor.

010f06 PCB existence

Please remove the PCB on the NR conveyor.

010f07 PCB existence

There is no PCB on the NL conveyor.

010f08 PCB existence

There is no PCB on the NA conveyor.

010f0b PCB existence

There is no PCB on the NR conveyor.

010f10 PCB existence

Please remove the PCB of stage 1.

010f12 PCB existence

The PCB is taken into the positioned place of stage 1.

010f14 PCB existence

Please remove the PCB of the inlet of input buffer cnvr.

010f15 PCB existence

Please remove the PCB of the positioning 1conveyor.

010f18 PCB existence

Please remove the PCB of inlet and outlet of output cnvr.

010f19 PCB existence

There is no PCB on the inlet of input buffer conveyer.

010f20 PCB existence

There is no PCB on the positioning 1conveyor.

010f23 PCB existence

There is no PCB on the inlet and outlet of output cnvr.

010f24 PCB existence

There is no PCB that can be transported.

010f25 PCB existence

Two PCBs were detected on the supply conveyor. Please remove the PCB of the

conveyor entrance.

010f26 PCB existence

Two PCBs were detected on the discharge conveyor. Please remove the PCB on

the conveyor.

0605-002

2.2 List of Warning Messages

2-6

AKHEMT-ID

Warning Codes Display Field A (Scope of Warning Messages)

Display Field B (Details of Warning Messages)

011001 Empty Feeder (rear)

Please set the feeder (back) that used by the pattern program.

011101 Empty Feeder (front)

Please set the feeder (front) that used by the pattern program.

011201 Transfer main loop

Press [POWER ON] button to activate Load Power circuit.

011301 Transfer main loop (backup, wide set)

Press [POWER ON] button to activate Load Power circuit.

011401 Zeroing not ﬁ nish

Perform All zeroing

011501 Feeder communication not ﬁ nish (rear)

Please wait for a while.

011601 Feeder communication not ﬁ nish (front)

Please wait for a while.

011701 PCB position

Please position the PCB

0602-001

2.2 List of Warning Messages