4OM-1345-009_w.pdf - 第215页
4-26 AKHEMT -ID 0605-001
4-25
AKHEMT-ID
3.8 Various Teach Errors
Z
A
B CC DDD
Detailed Classifi cation: Detailed Classifi cation
Small Classifi cation: Small Classifi cation
Middle Classifi cation: Middle Classifi cation
0: Character Recognition (Nozzle Missing)
E: Character Recognition (Other Errors)
Large Classifi cation (A)
Classifi cation Criteria
Notice
When an error ID other than the described ones is issued, contact
our service personnel for some advice.
Table 4D11
Recognition Error ID Description of Recognition Error, Cause, and Remedy
0 A 0 ** 001 Lighting teaching Error
0 A 0 ** 002 Lighting teaching Error
0 A 0 ** 003 Lighting teaching Error
0 A 0 ** 004 Lighting teaching Error
(Cause) Lighting Teaching Error
(Remedy) Contact our service personnel for details.
0 A 0 ** 010 The front reverse side of the Jig is opposite.
0 A 0 ** 011
0 A 0 ** 012
(Cause) Improper Jig Attachment
(Remedy) Check how the jig is attached. If necessary, set it up correctly.
0 A 0 ** 013 Lighting teaching Error
0 A 0 ** 020 Lighting teaching Error
(Cause) Lighting Teaching Error
(Remedy) Contact our service personnel for details.
0 A E ** 001 Others
(Cause) Self-Diagnostics Error Message
(Remedy) Contact our service personnel for details.
1 A * * * * * * Others
(Cause) Self-Diagnostics Error Message
(Remedy) Contact our service personnel for details.
0602-001
3.8 Various Teach Errors
4-26
AKHEMT-ID
0605-001
5-A
AKHEMT-ID
0605-001
Chapter 5
Troubleshooting on Component Picks and Placement
This chapter describes the scope of troubleshooting on
component picks and placement.
•
Classifi cation of Failure Symptoms and Helpful Hints on
Countermeasures against Failure
•
Troubleshooting on Pickup Errors
•
Troubleshooting on Component Placement Errors