4OM-1345-009_w.pdf - 第158页
3-1 1 AKHEMT -ID Erroe ID Error Name, Description, Cause, and Remedy 410306 Pattern Program Error The error is found in the nozzle candidate number of the conversion pattern program. ----- 410307 Pattern Program Error Th…
3-10
AKHEMT-ID
0602-001
3.2 Data
Table 4C4
Erroe ID Error Name, Description, Cause, and Remedy
410101 Data Error
Machine data and system data error detected.
-----
410102 Data Error
Auto run start mode setup data error
-----
410103 Data Error
Steps in converted pattern program is more
-----
410104 Data Error
Pattern Program Errors(PECRecog step error)
-----
410105 Data Error
The component library data used by the pattern program data doesn’t exist.
-----
410106 Data Error
The nozzle type data registered in the nozzle data doesn’t exist
-----
410107 Data Error
The nozzle type data registered in the nozzle data doesn’t exist
-----
410201 Mode data Error
Abnormality is found in the production driving beginning mode setting data.
-----
410301 Pattern Program Error
Steps in converted pattern program is more
-----
410302 Pattern Program Error
There are Errors in converted pattern program (PEC recog steps Error).
-----
410303 Pattern Program Error
The converted pattern program is not exist, the data is damaged.
-----
410304 Pattern Program Error
The error is found in the adsorption nozzle number of the conversion pattern
program.
-----
410305 Pattern Program Error
The error is found in the order of adsorption of the conversion system pattern
program.
-----
0602-001
3.2 Data
3-11
AKHEMT-ID
Erroe ID Error Name, Description, Cause, and Remedy
410306 Pattern Program Error
The error is found in the nozzle candidate number of the conversion pattern
program.
-----
410307 Pattern Program Error
The error is found in the adsorption lane number of the conversion pattern program.
-----
410308 Pattern Program Error
The error is found in the alternation lane number of the comp arrangement data of
the conversion pattern program.
-----
410309 Pattern Program Error
The conversion of the pattern program did not end in prescribed time.
-----
410401 Component Library Data Error
The part library data used by the converted pattern program doesn’t exist.
-----
410402 Component Library Data Error
The use nozzle candidate was not able to exchange nozzles because of the skip
specifi cation.
-----
410501 Nozzle Data Error
The error is found in the head nozzle data of the device system data.
-----
410502 Nozzle Data Error
The error is found in the stocker nozzle data of the device system data.
-----
410601 Data Error
-----
410602 Data Error
Error is found in the AUTO OPN MODE beginning mode setting data.
-----
410701 Program Error
It was a error setting of the sequence data was found.
-----
410702 Program Error
It was a error setting of the polling task was found.
-----
0602-001
3.2 Data
3-12
AKHEMT-ID
3.3 Conveyor
Table 4C5
Erroe ID Error Name, Description, Cause, and Remedy
420801 Manual transfer error
When operation started, error was detected.
-----
420802 Manual transfer error
Error was detected while operating.
-----
420803 Manual transfer error
Operation did not end in prescribed time.
-----
420901 Transfer Error (Others)
Please check the PCB on each conveyer.
-----
421101 Input Buffer Cnvr. Overtime
PCB from inp. Machine was not received.
Please continue the work after checking the PCB on a conveyor.
421102 Input Buffer Cnvr. Overtime
The PCB transport (exhaust) to Cnvr. Positioning1 did not end in prescribed time.
Please continue the work after checking the PCB on a conveyor.
421103 Input Buffer Cnvr. Overtime
The movement to PCB receiving position did not end in prescribed time.
-----
421104 Input Buffer Cnvr. Overtime
The movement to the arrangement position did not end in prescribed time.
-----
421105 Input Buffer Cnvr. Overtime
The reversal positioning operation did not end in prescribed time.
Please continue the work after checking the PCB on a conveyor.
0605-002
3.3 Conveyor