4OM-1345-009_w.pdf - 第189页

4-B AKHEMT -ID 0602-001

4-A

AKHEMT-ID

0602-001

Chapter 4

Troubleshooting from Recognition Error IDs

This chapter describes the troubleshooting from

recognition error IDs.

•

Description of Recognition Error ID (Example)

•

Recognition Error IDs and Controlled Areas

•

Recognition Error IDs and Remedial Procedures

4-B

AKHEMT-ID

0602-001

4-1

AKHEMT-ID

0605-002

1. Description of Recognition Error ID (Example)

[1] [2] [3]

Table 4D1

Recognition Error ID Description of Recognition Error, Cause, and Remedy

0 5 0 ** 001 Component was not found

(Cause 1) Check if the feeder is loaded with components other than the

speciﬁ ed ones (the components to be used).

(Cause 2) The vacuum suction force is too weak.

(Cause 3) An improper nozzle is selected for the components or vice

versa.

(Remedy 1) Check if proper components are used.

(Remedy 2) Check the vacuum pressure.

(Remedy 3) Check the parameters in the nozzle type data and the

component library data.

0 5 1 ** 001 Component was not detected.

(Cause) Component Recognition Error

(Remedy) Contact our service personnel for details.

(Continued to the next page.)

[4]

[1] Recognition Error ID

The recognition error IDs (IDs displayed in the "ERROR" window) are

described in the numerical order.

[2] Description of Recognition Error

Described are the contents of a recognition error that will be displayed

in the "ERROR" window.

[3] Cause and Remedy

Described are the causes and remedial procedures of the error in "[2]

Description of Recognition Error".

The causes and remedies are correlated as follows.

(Cause 1)

→

(Remedy 1)

(Cause 2)

→

(Remedy 2)

(Cause 3)

→

(Remedy 3)

[4] Continued to the next page

This indicates that the related contents are described subsequently on

the next page.