4OM-1345-009_w.pdf - 第134页
2-9 AKHEMT -ID W arning Codes Display Field A (Scope of W arning Messages) Display Field B (Details of W arning Messages) 013001 Load Power is not OFF . Press [Emergency STOP] button to Load Power of f. 013101 Feeder set…
2-8
AKHEMT-ID
Warning Codes Display Field A (Scope of Warning Messages)
Display Field B (Details of Warning Messages)
012001 Recycling Conveyor (rear)
Recycling conveyor (back) is fi lled.
012101 Recycling Conveyor (front)
Recycling conveyor (front) is fi lled.
012201 Recycling Conveyor (rear)
Comp. Trash Box (rear) is fi lled.
012301 Recycling Conveyor (front)
Comp. Trash Box (front) is fi lled.
012501 Data check
Error was found in internal data of the control. Please change the model or try to
save the system data.
012601 Recycling Conveyor (rear)
Please connect the recycling conveyor (rear).
012701 Recycling Conveyor (front)
Please connect the recycling conveyor (front).
012801 Tray safety door (rear)
Please close tray safety door and push tray ready sw(rear).
012901 Tray safety door (front)
Please close tray safety door and push tray ready sw(front).
012a01 Tray shortage Comp (rear)
Please supply comp, close tray door(rear) and push tray ready sw(rear).
012b01 Tray shortage Comp (front)
Please supply comp, close tray safety door and push tray ready sw(front).
012c01 PCB Size X
Please check the PCB size X of pattern program data.
012d01 PCB Size Y
Please check the PCB size Y of pattern program data.
012e01 Magazine existence, Type difference
Please check the existence of a magazine, or the number of stages of a magazine.
012f01 Magazine existence, Type difference
Please check the existence of a magazine, or the number of stages of a magazine.
0605-002
2.2 List of Warning Messages
2-9
AKHEMT-ID
Warning Codes Display Field A (Scope of Warning Messages)
Display Field B (Details of Warning Messages)
013001 Load Power is not OFF.
Press [Emergency STOP] button to Load Power off.
013101 Feeder set Err
The feeder suppressor is tilting. (Rear)
013102 Feeder set Err
There is a Disengaged Latch. (Rear)
013103 Feeder set Err
The feeder suppressor is tilting. (Front)
013104 Feeder set Err
There is a Disengaged Latch. (Front)
013201 The number Y of matrices (Y-axis operation limit)
The component of the specifi ed number of matrices cannot be photoed with a PEC
recognition camera.
013202 The number Y of matrices (Y-axis operation limit)
It is only the parts of one sequence which can be photoed with a PEC recog
camera. The pick-up last pos teaching (pitch automatic teaching) cannot be
performed.
013203 The number Y of matrices (Y-axis operation limit)
This component cannot be photoed with a PEC recognition camera. The fi rst time
and the last extraction pos teaching (automatic teaching) cannot be performed.
013301 Press low Err
The vacuum pressure low was detected.
013302 Press low Err
The blow pressure low was detected.
013401 Linear Measure
Please install since the line sensor control version 2.14.
(It takes 30 seconds of about three minutes.)
013501 Confi rm the last placement position
Please set the placement settings to the placement. (head1)
013502 Confi rm the last placement position
Please set the placement settings to the placement. (head2)
013701 Incorrectly seated Nozstkr
Incorrectly seated Nozstkr 1 (rear)
013702 Incorrectly seated Nozstkr
Incorrectly seated Nozstkr 2 (rear)
013703 Incorrectly seated Nozstkr
Incorrectly seated Nozstkr 1 (front)
013704 Incorrectly seated Nozstkr
Incorrectly seated Nozstkr 2 (front)
0605-002
2.2 List of Warning Messages
2-10
AKHEMT-ID
0602-001
3. Machine Information
3.1 "Machine Information" Window
This window shows various kinds of information while the machine is
running.
Note
The machine does not stop running when this window becomes active.
[2]
[3]
[1]
[4]
Fig. 4B3
[1] Display Field A
Displayed is the outline of the machine information.
[2] Display Field B
Displayed is the detailed machine information.
[3] [OK] Button
When pressed, this button closes the "Machine Information" window.
[4] [Clear Alarm] Button
When pressed, this button cancels an alarm (sound) only.
0602-001
3. Machine Information