4OM-1345-009_w.pdf - 第80页
1-25 AKHEMT -ID 3.3.4 Feeder Base Driving Section Worm Gears (2 places) Every 3 Months Lubrication (MOL YNOC GREASE AP1) Required T ime: 2 minutes Apply a small amount of new grease to the worm gears with a syringe. Use …
1-24
AKHEMT-ID
Notice
Be sure to use a suction force such as a vacuum cleaner for the
cleaning.
Do not blow air to any cleaning section with an air gun.
When air is blown, the dirt and dust inside the machine will disperse,
causing the recognition system and the machine to malfunction.
Fiducial Marks (2 places)
Every Week Cleaning
Required Time: 1 minute
Wipe the upper surfaces of the fiducial
marks with a dry lens cleaning cloth.
Sebum (fingerprint) or oil
should not adhere to the
fiducial marks.
If sebum or oil adheres, wipe it
off with a lens cleaning cloth
which contains a small amount
of alcohol.
Notice
QFP Glass Plate Jigs (2 pcs.)
Every Month Cleaning
Required Time: 1 minute
Wipe the jigs with a dry lens cleaning cloth.
Sebum (fingerprint) or oil
should not adhere to the QFP
glass plate jigs.
If sebum or oil adheres, wipe it
off with a lens cleaning cloth
which contains a small amount
of alcohol.
Teaching Plates (2 places)
Every Month Cleaning
Required Time: 1 minute
Remove foreign substances and unrequired
components and wipe off dirt and dust with
a rag.
Notice
Fig. 4A16
0609-002
3.3 Inspection, Cleaning, and Lubrication Spots
1-25
AKHEMT-ID
3.3.4 Feeder Base Driving Section
Worm Gears (2 places)
Every 3 Months Lubrication
(MOLYNOC GREASE AP1)
Required Time: 2 minutes
Apply a small amount of new grease to the
worm gears with a syringe.
Use No. 19 (brown) nozzle.
Note
No. 19 (brown)
Fig. 4A16-1
0605-002
3.3 Inspection, Cleaning, and Lubrication Spots
1-26
AKHEMT-ID
3.3.5 Feeder Cart Section
Groove on Feeder Base
Every Week Cleaning
Required Time: 2 minutes
Suck dirt and dust with a vacuum cleaner.
Upper Surface of Feeder Base
Every Day Cleaning
Required Time: 2 minutes
Remove foreign substances and unrequired
components with a vacuum cleaner and
wipe off dirt and dust with a rag.
Fig. 4A17
0609-003
3.3 Inspection, Cleaning, and Lubrication Spots