4OM-1345-009_w.pdf - 第40页

Safety Precautions Safe-29 AKHE-ID No. Alert Labels and Description (16) Description  The inside of the recognition light source unit becomes high in temperature. Before replacing the lamp with a new one, set the power …

100%1 / 233
Safety Precautions
Safe-28
AKHE-ID
No. Alert Labels and Description
(14)
Description
The grounding line (PE) must be connected fi rst to the leading-in section of the
primary power supply.
Imperfect grounding will cause an electric shock.
(15)
(15-1)
(15-2)
(15-3)
Description
This label indicates that high voltage is applied to the area.
Residual voltages may remain behind for a few minutes in the internal devices of
the machine after power interception.
Before performing maintenance work, wait until the char
ge lamps of the DC power
supply and the servoamplifi er go "OFF" in 10 minutes or more after the power
breaker is set to "OFF".
0605-003
Safety Precautions
Safe-29
AKHE-ID
No. Alert Labels and Description
(16)
Description
The inside of the recognition light source unit becomes high in temperature.
Before replacing the lamp with a new one, set the power breaker to "OFF" and leave
the unit intact until it cools down suffi ciently.
(20)
Description
Before operating the machine, please read the instruction manual carefully for
correct operations.
An operator
’s error will break down the machine, causing an injury or a serious
accident.
(21)
Description
Do not step on the machine.
The machine may be damaged, causing you to fall down from the machine and get
injured.
0605-003
Safety Precautions
Safe-30
AKHE-ID
No. Alert Labels and Description
(22)
Description
Be sure to attach or detach the feeder carefully with both hands. Otherwise,
the feeder may fall down and break. You may also be given an injury.
(23)
Description
Only the person who has fi
nished operator training in the operation and
maintenance of the machine should touch the machine. Otherwise, the
machine will be break down.
(24)
Description
While the machine is running, be sure not to disconnect any connector.
Be sure to attach or detach the feeder base connector after the feeder base
has descended and stopped completely
.
0605-003