4OM-1345-009_w.pdf - 第174页

3-25 AKHEMT -ID 3.8 Head-Related Errors T able 4C10 Erroe ID Error Name, Description, Cause, and Remedy 4A0101 Head Zero Return NL axis zeroing Error . Please con ﬁ rm the nozzle has not fallen when you push the beam by …

3-24

AKHEMT-ID

Erroe ID Error Name, Description, Cause, and Remedy

49070e Nozzle set up

The remains nozzle was detected on the head. The nozzle cannot be set to this

position.

Please conﬁ rm the nozzle has not adhered to the position. Moreover, please clean

the line sensor when not adhering.

49070f Nozzle set up

The placed nozzle was undetectable on the head.

Please conﬁ rm whether the nozzle has adhered to the position.

490710 Nozzle set up

The receipt nozzle was undetectable on the head.

Please conﬁ rm whether the nozzle has adhered to the position.

490711 Nozzle set up

The remains nozzle was detected on the head.

Please conﬁ rm the nozzle has not adhered to the position. Moreover, please clean

the line sensor when not adhering.

490712 Nozzle set up

The linear measure error occurred in the head nozzle existence check.

Please conﬁ rm the nozzle arrangement, and execute the level teaching.

490713 Nozzle set up

The nozzle exchange sequence error occurred.

Please conﬁ rm the nozzle arrangement.

490714 Nozzle set up

The nozzle placement in nozzle stocker is different from the nozzle data.

Please conﬁ rm the nozzle placement.

490715 Nozzle set up

It failed in nozzle ID detection.

Please conﬁ rm the nozzle ID.

490716 Nozzle set up

Time-out of close nozzle stocker operation.

Nozzle stocker was opened for safety. Please conﬁ rm whether there is no rise to the

surface and the nozzle is not in opening and shutting caught state.

0602-001

3.7 Automatic Setup

3-25

AKHEMT-ID

3.8 Head-Related Errors

Table 4C10

Erroe ID Error Name, Description, Cause, and Remedy

4A0101 Head Zero Return

NL axis zeroing Error. Please conﬁ rm the nozzle has not fallen when you push the

beam by the hand.

When the lock of a safety door cannot be canceled, please push an emergency stop

button. (Please conﬁ rm the nozzle has not fallen when you push the beam by the

hand.) Please check error on a “MAINT-DVC CHK- MOTOR” screen.

4A0102 Head Zero Return

HL axis zeroing Error. Please conﬁ rm the nozzle has not fallen when you push the

beam by the hand.

When the lock of a safety door cannot be canceled, please push an emergency stop

button. (Please conﬁ rm the nozzle has not fallen when you push the beam by the

hand.) Please check error on a “MAINT-DVC CHK- MOTOR” screen.

4A0103 Head Zero Return

L1 axis zeroing Error. Please conﬁ rm the nozzle has not fallen when you push the

beam by the hand.

When the lock of a safety door cannot be canceled, please push an emergency stop

button. (Please conﬁ rm the nozzle has not fallen when you push the beam by the

hand.) Please check error on a “MAINT-DVC CHK- MOTOR” screen.

4A0104 Head Zero Return

L2 axis zeroing Error. Please conﬁ rm the nozzle has not fallen when you push the

beam by the hand.

When the lock of a safety door cannot be canceled, please push an emergency stop

button. (Please conﬁ rm the nozzle has not fallen when you push the beam by the

hand.) Please check error on a “MAINT-DVC CHK- MOTOR” screen.

4A0105 Head Zero Return

L3 axis zeroing Error. Please conﬁ rm the nozzle has not fallen when you push the

beam by the hand.

When the lock of a safety door cannot be canceled, please push an emergency stop

button. (Please conﬁ rm the nozzle has not fallen when you push the beam by the

hand.) Please check error on a “MAINT-DVC CHK- MOTOR” screen.

0609-002

3.8 Head-Related Errors

3-26

AKHEMT-ID

3.9 Others

Table 4C11

Erroe ID Error Name, Description, Cause, and Remedy

4b0101 Head Mis-Pickup Detection

Auto Run can’t be performed with the Mis-Pickup Component on the head.

Please perform abandonment operation from a control menu.

4b0201 Feeder communication Error.

Communication with the feeder has error.

Please check the number of component remain.

4b0202 Feeder communication Error.

Communication with the feeder has error. (System error)

-----

4b0203 Feeder communication Error

Feeder Alarm. Please conﬁ rm the feeder and the component.

-----

4b0301 Feeder Base

The feeder base detection was turned off while the cutter was working.

-----

4b0302 Feeder Base

The feeder unclamp operation was not completed within predetermined time.

-----

4b0303 Feeder Base

Feeder operation errors

Please check after removing feeder in case using tape feeder. Please check part of

supply in case using tray.

4b0304 Feeder Base

The feeder clamp operation was not completed within predetermined time.

-----

4b0401 Recycling Conveyor

The recycling conveyer (back) was ﬁ lled.

Please push a manual switch, and remove parts on the recycling conveyer.

4b0402 Recycling Conveyor

The recycling conveyer (front) was ﬁ lled.

Please push a manual switch, and remove parts on the recycling conveyer.

4b0403 Recycling Conveyor

The recycling conveyer (back) motor operation time out.

There is a possibility a problem in the motor wiring. Please check the motor wiring.

Please begin the production.

4b0404 Recycling Conveyor

The recycling conveyor (front) motor operation time out.

There is a possibility a problem in the motor wiring. Please check the motor wiring.

Please begin the production.

4b0405 Recycling Conveyor

Component trash Box (back) was ﬁ lled.

Please open the safety door, and empty the comp abandonment box.

0609-003

3.9 Others