4OM-1345-009_w.pdf - 第153页

3-6 AKHEMT -ID Erroe ID Error Name, Description, Cause, and Remedy 400420 Interlock Error L3 axis (Front) Interlock Detected. Please con ﬁ rm the nozzle has not fallen when you push the beam by the hand. Con ﬁ rm of Path…

3-5

AKHEMT-ID

Erroe ID Error Name, Description, Cause, and Remedy

40040e Interlock Error

CB Alarm XY(Rear) Detected.

-----

40040f Interlock Error

CB Alarm XY(Front) Detected.

-----

400410 Interlock Error

CB Error (Conveyor/Cutter) Detected.

-----

400411 Interlock Error

CB Alarm (CPU2) Detected.

-----

400412 Interlock Error

CB Alarm (DC24) Detected.

-----

400413 Interlock Error

Air pressure Drop Detected.

-----

400414 Interlock Error

CB Alarm (Vacuum Pump)

-----

400415 Interlock Error

The urgent stop reserve input was input.

Turning on the power supply again then the emergency stop must be pushed, and

the starting point must return later.

400416 Interlock Error

NL axis (Front) Interlock Detected. Please conﬁ rm the nozzle has not fallen when

you push the beam by the hand.

The starting point must return. When the lock of a safety door cannot be canceled,

please push an emergency stop button. (Please conﬁ rm the nozzle has not fallen

when you push the beam by the hand.)

400417 Interlock Error

NL axis(Rear) Interlock Detected. Please conﬁ rm the nozzle has not fallen when

you push the beam by the hand.

The starting point must return. When the lock of a safety door cannot be canceled,

please push an emergency stop button. (Please conﬁ rm the nozzle has not fallen

when you push the beam by the hand.)

400418 Interlock Error

L1 axis(Front) Interlock Detected. Please conﬁ rm the nozzle has not fallen when

you push the beam by the hand.

Conﬁ rm of Path line/Head excess pushing detection.

400419 Interlock Error

L2 axis(Front) Interlock Detected. Please conﬁ rm the nozzle has not fallen when

you push the beam by the hand.

Conﬁ rm of Path line/Head excess pushing detection.

0609-002

3.1 Safety Devices

3-6

AKHEMT-ID

Erroe ID Error Name, Description, Cause, and Remedy

400420 Interlock Error

L3 axis (Front) Interlock Detected. Please conﬁ rm the nozzle has not fallen when

you push the beam by the hand.

Conﬁ rm of Path line/Head excess pushing detection.

400421 Interlock Error

L1 axis (Rear) Interlock Detected. Please conﬁ rm the nozzle has not fallen when

you push the beam by the hand.

Conﬁ rm of Path line/Head excess pushing detection.

400422 Interlock Error

L2 axis (Rear) Interlock Detected. Please conﬁ rm the nozzle has not fallen when

you push the beam by the hand.

Conﬁ rm of Path line/Head excess pushing detection.

400423 Interlock Error

L3 axis (Rear) Interlock Detected. Please conﬁ rm the nozzle has not fallen when

you push the beam by the hand.

Conﬁ rm of Path line/Head excess pushing detection.

400425 Interlock Error

An emergency stop switch is pushed.

Please switch on a power supply after canceling an emergency stop switch.

400501 Lightning Surge Warning

Lightning Surge Protector works; L201,L202,L203. Please turn on the load power

supply after resetting error.

-----

400502 Lightning Surge Warning

-----

400503 Lightning Surge Warning

-----

400504 Lightning Surge Warning

-----

400505 Lightning Surge Warning

-----

400601 Servo Alarm

Servo Alarm Detected.

-----

400602 Servo Alarm

All Beam alarm reseting API Error

-----

0609-003

3.1 Safety Devices

3-7

AKHEMT-ID

Erroe ID Error Name, Description, Cause, and Remedy

400701 Zero Return

Beam XY zeroing Error

-----

400702 Zero Return

When beam XY (Rear) starting zeroed, the standard mark gap was generated.

Please start up the power supply.

400703 Zero Return

When beam XY (Front) starting zeroed, the standard mark gap was generated.

Please start up the power supply.

400704 Zero Return

When beam XY (Rear) starting zeroed, recognition error of a standard mark was

generated.

-----

400705 Zero Return

When beam XY (Front) starting zeroed, recognition error of a standard mark was

generated.

-----

400706 Zero Return

The Basis Mark recognition processing at the time of a beam XY (rear) starting

zeroed was not completed within predetermined time.

-----

400707 Zero Return

The Basis Mark recognition processing at the time of a beam XY (front) starting

zeroed was not completed within predetermined time.

-----

400801 Cutter Error

Cutter Alarm Detected (waveform Data setting)

-----

400802 Cutter Error

Cutter Alarm Detected (Zeroing)

-----

400803 Cutter Error

Cutter axis Time Out (Start zero)

-----

400804 Cutter Error

Cutter axis Time Out (Zero)

-----

400805 Cutter Error

Cutter axis zero ﬁ nished

-----

400806 Cutter Error

Cutter axis Alarm Detection (Start Locating)

-----

0609-003

3.1 Safety Devices