4OM-1345-009_w.pdf - 第131页
2-6 AKHEMT -ID W arning Codes Display Field A (Scope of W arning Messages) Display Field B (Details of W arning Messages) 01 1001 Empty Feeder (rear) Please set the feeder (back) that used by the pattern program. 01 1 10…
2-5
AKHEMT-ID
Warning Codes Display Field A (Scope of Warning Messages)
Display Field B (Details of Warning Messages)
010f01 PCB existence
Please remove the PCB on the conveyor.
010f02 PCB existence
Please remove the PCB on the NL conveyor.
010f03 PCB existence
Please remove the PCB on the NA conveyor.
010f06 PCB existence
Please remove the PCB on the NR conveyor.
010f07 PCB existence
There is no PCB on the NL conveyor.
010f08 PCB existence
There is no PCB on the NA conveyor.
010f0b PCB existence
There is no PCB on the NR conveyor.
010f10 PCB existence
Please remove the PCB of stage 1.
010f12 PCB existence
The PCB is taken into the positioned place of stage 1.
010f14 PCB existence
Please remove the PCB of the inlet of input buffer cnvr.
010f15 PCB existence
Please remove the PCB of the positioning 1conveyor.
010f18 PCB existence
Please remove the PCB of inlet and outlet of output cnvr.
010f19 PCB existence
There is no PCB on the inlet of input buffer conveyer.
010f20 PCB existence
There is no PCB on the positioning 1conveyor.
010f23 PCB existence
There is no PCB on the inlet and outlet of output cnvr.
010f24 PCB existence
There is no PCB that can be transported.
010f25 PCB existence
Two PCBs were detected on the supply conveyor. Please remove the PCB of the
conveyor entrance.
010f26 PCB existence
Two PCBs were detected on the discharge conveyor. Please remove the PCB on
the conveyor.
0605-002
2.2 List of Warning Messages
2-6
AKHEMT-ID
Warning Codes Display Field A (Scope of Warning Messages)
Display Field B (Details of Warning Messages)
011001 Empty Feeder (rear)
Please set the feeder (back) that used by the pattern program.
011101 Empty Feeder (front)
Please set the feeder (front) that used by the pattern program.
011201 Transfer main loop
Press [POWER ON] button to activate Load Power circuit.
011301 Transfer main loop (backup, wide set)
Press [POWER ON] button to activate Load Power circuit.
011401 Zeroing not fi nish
Perform All zeroing
011501 Feeder communication not fi nish (rear)
Please wait for a while.
011601 Feeder communication not fi nish (front)
Please wait for a while.
011701 PCB position
Please position the PCB
0602-001
2.2 List of Warning Messages
2-7
AKHEMT-ID
Warning Codes Display Field A (Scope of Warning Messages)
Display Field B (Details of Warning Messages)
011801 Data transfer not fi nish
It cann’t start because data is not set properly.
011901 Head irregular comp. confi rmation
Please perform all zeroing, turn off a vacuum and remove the component on the
head.
011a01 Nozzle stocker lower limit confi rmation
Perform All zeroing.
011b01 NL axis zero confi rmation
Perform All zeroing.
011c01 Nozzle arrangement confi rmation (rear)
The nozzle arrangement of the Current Program and the head (back) is different.
011d01 Nozzle arrangement confi rmation (front)
The nozzle arrangement of the Current Program and the head (front) is different.
011e01 Feeder reload (rear)
Please reload the feeder that has shortage of comp.
011f01 Feeder reload (front)
Please reload the feeder that has shortage of comp.
0602-001
2.2 List of Warning Messages