4OM-1345-009_w.pdf - 第132页

2-7 AKHEMT -ID W arning Codes Display Field A (Scope of W arning Messages) Display Field B (Details of W arning Messages) 01 1801 Data transfer not ﬁ nish It cann’t start because data is not set properly . 01 1901 Head i…

2-6

AKHEMT-ID

Warning Codes Display Field A (Scope of Warning Messages)

Display Field B (Details of Warning Messages)

011001 Empty Feeder (rear)

Please set the feeder (back) that used by the pattern program.

011101 Empty Feeder (front)

Please set the feeder (front) that used by the pattern program.

011201 Transfer main loop

Press [POWER ON] button to activate Load Power circuit.

011301 Transfer main loop (backup, wide set)

Press [POWER ON] button to activate Load Power circuit.

011401 Zeroing not ﬁ nish

Perform All zeroing

011501 Feeder communication not ﬁ nish (rear)

Please wait for a while.

011601 Feeder communication not ﬁ nish (front)

Please wait for a while.

011701 PCB position

Please position the PCB

0602-001

2.2 List of Warning Messages

2-7

AKHEMT-ID

Warning Codes Display Field A (Scope of Warning Messages)

Display Field B (Details of Warning Messages)

011801 Data transfer not ﬁ nish

It cann’t start because data is not set properly.

011901 Head irregular comp. conﬁ rmation

Please perform all zeroing, turn off a vacuum and remove the component on the

head.

011a01 Nozzle stocker lower limit conﬁ rmation

Perform All zeroing.

011b01 NL axis zero conﬁ rmation

Perform All zeroing.

011c01 Nozzle arrangement conﬁ rmation (rear)

The nozzle arrangement of the Current Program and the head (back) is different.

011d01 Nozzle arrangement conﬁ rmation (front)

The nozzle arrangement of the Current Program and the head (front) is different.

011e01 Feeder reload (rear)

Please reload the feeder that has shortage of comp.

011f01 Feeder reload (front)

Please reload the feeder that has shortage of comp.

0602-001

2.2 List of Warning Messages

2-8

AKHEMT-ID

Warning Codes Display Field A (Scope of Warning Messages)

Display Field B (Details of Warning Messages)

012001 Recycling Conveyor (rear)

Recycling conveyor (back) is ﬁ lled.

012101 Recycling Conveyor (front)

Recycling conveyor (front) is ﬁ lled.

012201 Recycling Conveyor (rear)

Comp. Trash Box (rear) is ﬁ lled.

012301 Recycling Conveyor (front)

Comp. Trash Box (front) is ﬁ lled.

012501 Data check

Error was found in internal data of the control. Please change the model or try to

save the system data.

012601 Recycling Conveyor (rear)

Please connect the recycling conveyor (rear).

012701 Recycling Conveyor (front)

Please connect the recycling conveyor (front).

012801 Tray safety door (rear)

Please close tray safety door and push tray ready sw(rear).

012901 Tray safety door (front)

Please close tray safety door and push tray ready sw(front).

012a01 Tray shortage Comp (rear)

Please supply comp, close tray door(rear) and push tray ready sw(rear).

012b01 Tray shortage Comp (front)

Please supply comp, close tray safety door and push tray ready sw(front).

012c01 PCB Size X

Please check the PCB size X of pattern program data.

012d01 PCB Size Y

Please check the PCB size Y of pattern program data.

012e01 Magazine existence, Type difference

Please check the existence of a magazine, or the number of stages of a magazine.

012f01 Magazine existence, Type difference

Please check the existence of a magazine, or the number of stages of a magazine.

0605-002

2.2 List of Warning Messages