4OM-1345-009_w.pdf - 第58页
1-3 AKHEMT -ID • Air Gun Do not use the air gun for any spots other than the speci fi ed ones. If dirt and dust are dispersed, they may adhere to the sensors and moving mechanisms, causing the machine to break down. Fig. …
1-2
AKHEMT-ID
1.2 Preparation for Maintenance
1.2.1 Preparation for Cleaning
Prepare the following items.
•
Brush
Use a brush whose bristles do not come off if possible.
•
Cotton Swab
Use a normal cotton swab on the market.
•
Rag
Use a rag made of such material as cotton, etc., that produces as less waste
thread as possible.
A clean rag must be used depending on a spot to be cleaned.
Notice
The remaining waste thread if any will cause the machine to break
down.
•
Oiled Rag
Use a rag made of such material as cotton, etc., that produces as less waste
thread as possible.
Too much grease should not be applied and any different type of grease
should not be mixed into the specifi ed one.
Notice
The remaining waste thread if any will cause the machine to break
down.
0602-001
1.2 Preparation for Maintenance
1-3
AKHEMT-ID
•
Air Gun
Do not use the air gun for any spots other than the specifi ed ones.
If dirt and dust are dispersed, they may adhere to the sensors and moving
mechanisms, causing the machine to break down.
Fig. 4A1 Air Gun
•
Vacuum Cleaner
If the suction hole of the vacuum cleaner is changed to a smaller one, some
spots can be cleaned more easily.
•
Cleaning Paper
Use the attached pieces of paper (standard accessory).
•
Lens Cleaning Cloth
Use the attached pieces of cloth (standard accessory).
Fig. 4A2 Lens Cleaning Cloth
0602-001
1.2 Preparation for Maintenance
1-4
AKHEMT-ID
•
Vacuum Tweezers
Use a pair of vacuum tweezers on the market.
(Handy Type)
(Motor-Driven Type)
Fig. 4A3 Various Types of Vacuum Tweezers
0602-001
1.2 Preparation for Maintenance