4H4CEOM2.pdf - 第15页

Page 7-9 DA T A MODIFICA TION 7 7-4-2 Complete Part Information General parts information including the chip data and extended chip data (only applicable chips) is indicated. 1 . After selecting the chip name of the feed…

Page 7-8

Feeder Layout / Stock Data

7-4-1 Occupancy

You can check the occupancy on the feeder table.

For feeder table 1 (on the tape feeder side)

1. After selecting the desired table on

the feeder layout and stock data

screen, press Occupancy .

• The rate of the occupied feeder table is dis-

played.

• The occupied feeder table including the one

which occupies some pitch in a feeder is

displayed in blue. If data are set not to set the

feeders, the indication becomes red.

For the feeder table 2 (on the tray feeder side)

4H4C-E-OMA07-A01-01

Page 7-9

DATA MODIFICATION

7-4-2 Complete Part Information

General parts information including the chip data and extended chip data (only applicable chips) is

indicated.

1. After selecting the chip name of the

feeder layout and stock data screen,

press Complete part info .

• When the same parts more than 4 are set in

the stock data, press Next Address to display

the next address by 3 parts.

7-4-3 Angle Definition

The angle definition in picking up and mounting the main chips is described.

1. Press of the feeder layout

and stock data screen.

• The style angle and the mount angle have a

common angle definition.

4H4C-E-OMA07-A01-02

Angle

definition

Feeder Layout / Stock Data

Page 7-10

7-5 Chip Data / Tray Data

Chip data

The chip data is checked and modified.

1. Press .

2. After selecting the feeder table, move

the cursor to “Chip name” of the chip

data to be changed with ↑ ↓ → ← ,

and press Change .

• Nozzle : Nozzle name

• Chip count : Chips per reel

• REF : Chip recognition reference

number

4H4C-E-OMA07-A01-05

Feeder layout

Stock data