4H4CEOM2.pdf - 第70页
Page 8-42 = MEMO = 4H4C-E-OMA08-A04-01
Page 8-41
TEACHING
8
Tray Pickup Position Teaching
11. After teaching the end position,
press + Complete .
12. Press Data change .
• The message asking the data change appears.
• To change manually, press
Tray data modify .
13. Press Yes , and decide the position.
• The pickup start position and end position of
the tray data is changed to the taught result.
14. Press .
• The tray pickup position teaching ends.
UNLOCK
4H4C-E-OMA08-A04-02
4H4C-EEn-DmPtTp-013
Page 8-42
= MEMO =
4H4C-E-OMA08-A04-01
Page 9-1
Changing the Production Board
To mount the parts on other board than the previous one, the adjustment of the
device and the supply of the production materials for each board are required.
This chapter describes how to change the production board, taking it for granted that
data of the production board is on PT.
Machine adjustment points due to the exchange of the production boards.
4H4C-E-OMA09-A01-01
Chapter 9
CHANGING THE PRODUCTION
BOARDS
Board holder
Support pin position adjustment (manual)
Operation part
Changing the production data
(manual)
Board conveyor
Transfer rail width adjustment
(automatic)
Setting materials
4H4C-AC00
4H4C-011E
Nozzle changer
Nozzle exchange
M908AA
030CC00AA01
4H4C-020E
4H4C-021E