4H4CEOM2.pdf - 第62页
Page 8-34 T eaching the Mount Position 12 . When the modification is needed, after checking SEQ No., press the red triangle, around the recognition screen holding UNLOCK to move the center of the pattern to the center of…
Page 8-33
TEACHING
8
Teaching the Mount Position
9. Press
UNLOCK
+ Teach start .
• The board is carried in to the stage, and moves
to the position to be mounted first.
10. Adjust the lamp value to what is
easier to see the screen.
11. When SEQ No. is known,
press Set SEQ to enter that numerals
( No. ).
• Move the board to the mounting position of
selected SEQ No.
∗ When SEQ No. is not known,
press
UNLOCK
+ To next SEQ to move the board
to the next coordinates which have the mount
position deviation.
NOTICE
Do not touch the recognition
screen here.
Pressing small red triangle, on
the recognition screen with
UNLOCK
held moves the coordinates, and
then press
UNLOCK
+ Complete to
renew the mount data.
To the next page
4H4C-E-OMA08-A03-04
1
2
Page 8-34
Teaching the Mount Position
12. When the modification is needed,
after checking SEQ No., press the red
triangle, around the recognition
screen holding
UNLOCK
to move the
center of the pattern to the center of
the screen.
13. Press
UNLOCK
+ Complete .
• The mount coordinates are renewed.
14. Press and return to the screen
for step 6.
∗ If the data save mode is set to Pattern, this
operation is not necessary.
15. Press Mount data edit on the screen
for step 6 again, and ensure that the
coordinates are renewed, then press
.
16. Press again.
17. Press Yes .
• The board is carried out and teaching is fin-
ished.
• The production data teaching screen reap-
pears.
4H4C-EEn-DmPtMp-003
4H4C-EEn-DmMd-001
4H4C-E-OMA08-A03-04
Page 8-35
TEACHING
8
To the next page
4H4C-015E
8-7 Pickup Position Learning Teaching
Teaching for the original data of the pickup position learning in the production is carried out.
NOTICE
Teaching for three addresses on the left side of
each feeder table is unavailable, because it is
unrecognizable. unavailable
For teaching, set the feeder to other address.
1.Press pickup position learning .
2. Press
UNLOCK
→
START
.
4H4C-E-OMA08-A03-03