4H4CEOM2.pdf - 第25页
Page 7-19 DA T A MODIFICA TION 7 4H4C-E-OMA07-A01-04 7-10 Function Switch Setting of the function switch to set the operating condition is checked. ∗ Only the pass mode can be changed to ON and OFF on this screen. As for…
Page 7-18
Call by SEQ
Call by
Comment
Skip
4H4C-E-OMA07-A01-03
7-9 Mount Data
The mount data is checked and modified.
1. Press Mount data .
• The mount data screen appears.
2. Select the head No. to be checked.
3. Modify the X and Y coordinates and
the mount angle if necessary.
• Mount points : All points including the
skipped ones
• Skip points : Points to skip mounting
• Skip (This cannot be changed while operation
is in progress.)
BAD : Bad block
USKP : Feeder layout skip
BSKP : Block data skip
MSKP : Mount data skip
∗ When skip is set by some data, priority is given
to the order above.
• ------------------ Skip (MSKP) is set.
∗ When the mount data screen is displayed from the automatic
operation stop screen, the skip button is not available.
• ------------------ moves the cursor to the specified SEQ No.
• ------------------ moves the cursor to SEQ of specified X and Y coordinates at the
lower position than the cursor.
• ------------------ moves the cursor to SEQ including the specified comment at the
lower position than the cursor.
Call by
Coordinate
Page 7-19
DATA MODIFICATION
7
4H4C-E-OMA07-A01-04
7-10 Function Switch
Setting of the function switch to set the operating condition is checked.
∗ Only the pass mode can be changed to ON and OFF on this screen.
As for other condition, change it on PT.
1. Press Function switch .
• The function switch screen appears.
• As for the function switches, refer to the
Programming Manual of PT.
2. Press ON or OFF of the pass
mode.
• The set switch is displayed in blue.
Page 7-20
4H4C-E-OMA07-A01-02
7-11 Library Display
Each library of the nozzle, tape feeder, recognition are displayed.
1. Select the library to display.
Nozzle Library
• The library data of the nozzle is displayed.
Detailed data of each nozzle can be seen.
Feeder Library
• The library data of the tape feeder is displayed.
Detailed data of each tape feeder can be seen.