4H4CEOM2.pdf - 第23页
Page 7-17 DA T A MODIFICA TION 7 7-8 Block Attribute Data The block attribute data is checked and modified. 1 . Press Block attribute data . • The block attribute data screen appears. 2. Modify the bad block mark coordin…
Page 7-16
7-7 Nozzle Stock Data
These are data of the position to set the nozzle to the nozzle changer.
∗ This screen is for referring to the nozzle stock data. Data cannot be changed. Change data on PT
if necessary.
1. Press Nozzle stock data .
• The nozzle stock data screen appears.
2. Select the stage and check data.
4H4C-E-OMA07-A01-03
Page 7-17
DATA MODIFICATION
7
7-8 Block Attribute Data
The block attribute data is checked and modified.
1. Press Block attribute data .
• The block attribute data screen appears.
2. Modify the bad block mark coordinate
(BAD. X, BAD. Y), if necessary.
[Items]
• BL : Block No.
• BAD : Bad block
• ORG. X, Y : Block origin coordinate
• BAD. X, Y : Bad block mark coordinate
• ROT : Block extension angle number
• Press Call by BL , and enter the block No. to
move the cursor to the specified block No.
1 :
R 90°
2 : 180°
3 :
L 90°
0 : 0°
4H4C-E-OMA07-A01-05
Page 7-18
Call by SEQ
Call by
Comment
Skip
4H4C-E-OMA07-A01-03
7-9 Mount Data
The mount data is checked and modified.
1. Press Mount data .
• The mount data screen appears.
2. Select the head No. to be checked.
3. Modify the X and Y coordinates and
the mount angle if necessary.
• Mount points : All points including the
skipped ones
• Skip points : Points to skip mounting
• Skip (This cannot be changed while operation
is in progress.)
BAD : Bad block
USKP : Feeder layout skip
BSKP : Block data skip
MSKP : Mount data skip
∗ When skip is set by some data, priority is given
to the order above.
• ------------------ Skip (MSKP) is set.
∗ When the mount data screen is displayed from the automatic
operation stop screen, the skip button is not available.
• ------------------ moves the cursor to the specified SEQ No.
• ------------------ moves the cursor to SEQ of specified X and Y coordinates at the
lower position than the cursor.
• ------------------ moves the cursor to SEQ including the specified comment at the
lower position than the cursor.
Call by
Coordinate