OM-1743-005w.pdf - 第102页

7.4.3 Cover T ape T ake-up Section T ape Guide Roller Every week Cleaning Clean it with a rag soaked in alcohol. Fig. G7 1209-001 7.4 Maintenance Spots OM-1743 7-8

Peeling Section

Every week Cleaning

Notice

If the cover tape is set while it has

any debris of cover tape on it,

then it might cause suppressor

deformation or pick-up error.

Lift the suppressor and clean it with a Cotton

swab or toothbrush.

Fig. G5

Pick-up Position

Every Three Months Check, Adjustment

Check the pick-up position, using the feeder adjusting jig

JG-0209 (Purchase separately).

If the pick-up position is not correct, adjust it.

Fig. G6

1209-001

7.4 Maintenance Spots

OM-1743

7-7

7.4.3 Cover Tape Take-up Section

Tape Guide Roller

Every week Cleaning

Clean it with a rag soaked in alcohol.

Fig. G7

1209-001

7.4 Maintenance Spots

OM-1743

7-8

7.4.4 Component Discharging Section

Discharging Outlet

Every week Cleaning

Blow the air in the direction of

the discharging outlet.

(The components are discharged

from the opening opposite to this

outlet).

When any component is

removed using air-blow,

the components might

scatter around, so perform

this operation paying

attention to the surrounding

condition.

Note

Fig. G8

1209-001

7.4 Maintenance Spots

OM-1743

7-9