OM-1743-005w.pdf - 第106页

7.5 Maintenance Method 7.5.1 Cover Removal and Attachment 7.5.1.1 Left Side Cover #1 Removal Procedure Procedure (1) Remove the three set screws for the Left Side Cover #1. Cover Set Screws Left Side Cover #1 Fig. G12 (2…

100%1 / 151
7.4.6 Tape Feed Gear Section
Worm Gear
Every 5 million times of operation or every Three Months Cleaning, Lubrication
Remove the cover and remove dust and debris using a cloth or bamboo probe.
Then, apply MOLYNOC Grease AP1 using the greasing jig.
Refer to "7.5.2 How to Apply Grease to the Sprocket Driving Gear
Unit" for details.
Reference
Fig. G10
7.4.7 Cover Tape Take-up Gear Section
Flat End Wheel, Worm Gear, Worm Wheel (Right Side, Left Side)
Every 5 million times of operation or every Three Months Cleaning, Lubrication
Remove the cover and remove dust and debris using a cloth or bamboo probe.
Then, apply MOLYNOC Grease AP1 using the greasing jig.
Flat End Wheel
Worm Gear
Worm Wheel
Flat End Wheel
Fig. G11
1209-001
7.4 Maintenance Spots
OM-1743
7-11
7.5 Maintenance Method
7.5.1 Cover Removal and Attachment
7.5.1.1 Left Side Cover #1 Removal Procedure
Procedure
(1) Remove the three set screws for the Left Side Cover #1.
Cover Set Screws
Left Side Cover #1
Fig. G12
(2) Hold the left side of the Left Side Cover #1 and slide it in the arrow direction
to remove.
It is easier to remove the cover by raising the part A and sliding the cover.
Sliding Direction
A
Fig. G13
1209-001
7.5 Maintenance Method
OM-1743
7-12
1209-001
7.5.1.2 Left Side Cover #1 Attachment Procedure
Procedure
(1) Hold the left side of the Left Side Cover #1 and slide it in the arrow direction
to attach.
Insert the claw section on the Left Side Cover #1 into the slit with the
sequence of 1, 2, 3 and 4 shown in the gure below and slide the cover while
pressing it from above.
Sliding Direction
Step 1, 2 psitions
Step 2, 2 psitions
Step 4, 2 psitions
Step 1, 1 psition
Fig. G14
Note
When the cover is attached, take care not to catch any cable.
(2) Fasten the cover set screws and x the Left Side Cover #1.
Cover Set Screws
Fig. G15
7.5 Maintenance Method
OM-1743
7-13