OM-1743-005w.pdf - 第145页
1 1.4 Cover T ape T ake-up Action not performed Remedy : Correct the cover tape route. Incorrect cover tape route If the cover tape route is incorrect, it might cause a take-up error or feed error . Cause : Incorrect cov…
1209-001
Notice
Chip component or foreign
substances including debris
Remedy
: Remove any chip component or foreign substance such as debris attached onto the
sprocket and completely clean the sprocket.
Cause : Chip component or foreign substances including debris have been
attached onto the sprocket and the sprocket does not rotate.
Chip component or foreign
substance including debris
Remedy
: Remove any chip component or foreign substance such as debris attached on the chute
and completely clean the surface of the chute.
If the taping component is mounted with any foreign substance attached, the suppressor
might be deformed or a pick-up error occur.
Therefore, clean it.
Cause : Chip component or foreign substances including debris have been
attached onto the chute and the suppressor does not securely hold the
tape.
11.3 Tape Feed not correctly performed
OM-1743
11-5
11.4 Cover Tape Take-up Action not performed
Remedy
: Correct the cover tape route.
Incorrect cover tape route
If the cover tape route is incorrect, it might cause a take-up error or feed error.
Cause : Incorrect cover tape route on the take-up tension lever section
Notice
Remedy
: Set the cover tape correctly.
Twist
If the cover tape is set incorrectly, it might cause a take-up error or feed error.
Cause : Twisted cover tape has been set.
Notice
1209-001
11.4 Cover Tape Take-up Action not performed
OM-1743
11-6
1209-001
Chip component or foreign
substance including debris
Remedy
: Detach the cover and remove any foreign substance.
Cause : Chip component or foreign substances including debris have entered
the take-up gear.
11.4 Cover Tape Take-up Action not performed
OM-1743
11-7