OM-1743-005w.pdf - 第147页
1 1.5 Cover T ape cut off Remedy : Replace with new tape. When a tape becomes old, its characteristics are changed, e.g., its tolerance and adhesive strength. Cause : Old tape is being used Note 1209-001 Chip component o…
1209-001
Chip component or foreign
substance including debris
Remedy
: Detach the cover and remove any foreign substance.
Cause : Chip component or foreign substances including debris have entered
the take-up gear.
11.4 Cover Tape Take-up Action not performed
OM-1743
11-7
11.5 Cover Tape cut off
Remedy
: Replace with new tape.
When a tape becomes old, its characteristics are changed, e.g., its tolerance and adhesive strength.
Cause : Old tape is being used
Note
1209-001
Chip component or foreign
substance including debris
Remedy
: Remove any chip component or foreign substance such as debris attached inside the
suppressor and completely clean the suppressor.
If the taping component is mounted with any foreign substance attached, the suppressor
might be deformed or a pick-up error occur.
Therefore, clean it.
Cause : Chip component or foreign substance such as debris has been attached
inside the suppressor and it damages the cover tape.
Notice
11.5 Cover Tape cut off
OM-1743
11-8
11.6 Cover Tape Take-up Gear does not rotate
1209-001
Remedy
: Remove any chip component or foreign substance such as debris entered in the gear
section and completely clean the gear.
Lubricate after clean the cover tape take-up gear section.
Refer to "Cover Tape Take-up Gear Section" in "7.3.3 Quarterly Maintenance" for details.
If the take-up gear is operated while any foreign substance has been entered, it might cause
abrasion.
Therefore, remove any of them.
Cause : Chip component or foreign substance such as debris has been entered
the take-up gear section and take-up rotation error occurs.
Notice
Reference
11.6 Cover Tape Take-up Gear does not rotate
OM-1743
11-9