OM-1743-005w.pdf - 第37页

(1 1) Maintain the suppressor being lowered: press the upper section of the front hook to x the suppressor . Fix the suppressor with the front hook. Front Hook Press Fig. B10 NOTICE Securely lock the suppressor with the…

(7) Set the carrier tape in the chute section so that the sprocket pins are securely

engaged with the sprocket holes.

(8) Make sure that components are not scattered on the carrier tape.

(9) Lower the suppressor carefully.

Push down the suppressor so that it does not mount on the chute.

(10) Make sure that the cover tape or chip component is not caught in the peeling

section.

Notice

If the cover tape or the chip component gets caught by the suppressor,

then the peeling section might be deformed or a pick-up error occur.

If there is any such catching of the cover tape or chip component, do not

pull it out forcibly; just lift the suppressor.

If operation is performed with the

cover tape caught in the

suppressor . . .

The peeling section might be

deformed.

If the suppressor is lowered with

any foreign substance on the tape

surface . . .

The peeling section might be

deformed.

Deformation

Cover Tape

Suppressor

Foreign Substance

Deformation

Fig. B9

1209-001

2.1 Attachment of Paper or Embossed Tape

OM-1743

2-6

(11) Maintain the suppressor being lowered: press the upper section of the front

hook to x the suppressor.

Fix the suppressor with the front hook.

Front Hook

Press

Fig. B10

NOTICE

Securely lock the suppressor with the front hook.

If the tape feeder is operated while the suppressor is

raised, the machine (SIGMA-F8) might be damaged

or incur a pick-up error.

1209-001

2.1 Attachment of Paper or Embossed Tape

OM-1743

2-7

(12) Use scissors to cut the tape, so that the excess tape section is 5 to 10 mm.

Notice

Use scissors which would not cut ngers, and cut the tape one by

one.

Tape

5 to 10 mm

Fig. B11

Notice

When the tape is cut, do not fold the end section.

The tape might not be cut correctly by using the cutter attached to

the machine (SIGMA-G4/G5).

Folding

Fig. B12

1209-001

2.1 Attachment of Paper or Embossed Tape

OM-1743

2-8