OM-1743-005w.pdf - 第79页

1209-001 5. Component Pick-up Position Alignment To pick up a component correctly, the component center is aligned with the pick- up position. The component center set position is marked on the suppressor. Also, the pick…

1209-001

OM-1743

4-18

1209-001

5. Component Pick-up Position Alignment

To pick up a component correctly, the component center is aligned with the pick-

up position.

The component center set position is marked on the suppressor.

Also, the pick-up position varies with the pitch of the feed.

Notice

If the component center is not aligned with the pick-up position, then the

pick-up cannot proceed correctly.

Reference

Refer to "4.2.4 Minimum Pitch Feed Operation" for the tape feeding operation.

Suppressor

Fig. E1

5. Component Pick-up Position Alignment

OM-1743

5-1

GT-38080, GD-38080

GD-38083

Pick-up Position at 4 mm pitchPick-up Position at 2 mm pitch

Direction of Feed

Pick-up

Position

Pick-up

Position

Direction of Feed

Pick-up

Position

Pick-up

Position

Pick-up Position at 1 mm pitch and 2mm pitch

Fig. E2

1209-001

5. Component Pick-up Position Alignment

OM-1743

5-2