OM-1743-005w.pdf - 第113页

1209-001 7.5.1.7 Right Side Cover Removal Procedure Procedure (1) Remove the two set screws for the Right Side Cover . Right Side Cover #1 Cover Set Screws Fig. G25 (2) Hold the left side of the Right Side Cover and slid…

1209-001

(3) Fasten the cover set screws to x the PCB BOX Cover.

Cover Set Screws

Fig. G24

7.5 Maintenance Method

OM-1743

7-18

1209-001

7.5.1.7 Right Side Cover Removal Procedure

Procedure

(1) Remove the two set screws for the Right Side Cover.

Right Side Cover #1

Cover Set Screws

Fig. G25

(2) Hold the left side of the Right Side Cover and slide it in the arrow direction

to remove.

Sliding Direction

Fig. G26

7.5 Maintenance Method

OM-1743

7-19

1209-001

7.5.1.8 Right Side Cover Attachment Procedure

Procedure

(1) Hold the upper side of the Right Side Cover and slide it in the arrow

direction to attach.

Insert the claw section on the Right Side Cover into the slit with the sequence

of 1, 2, 3 and 4 shown in the gure below and slide the cover while pressing

it from above.

Sliding Direction

Step 2

Step 3

Step 4

Step 1

Fig. G27

Note

When the cover is attached, take care not to catch any cable.

(2) Fasten the cover set screws to x the Right Side Cover.

Cover Set Screws

Fig. G28

7.5 Maintenance Method

OM-1743

7-20